Communication

View: 10 / 20 / ALL

  • 600

    ,

    These units convert a 4-20mA process current input into two identical isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels.

    Data Sheet
  • 951EN, 952EN

    ,

    These modules provide an isolated Ethernet network interface for analog and discrete I/O signals. Multi-range analog inputs and outputs support a wide variety of industrial devices. High-resolution, low noise, A/D and D/A converters deliver high accuracy and reliability. 3-way isolation further improves system performance.

    Data Sheet
  • BusWorks 900EN

    ,

    A series of dependable, yet economical, remote digital I/O modules that monitor and/or control up to 16 devices per unit. These units provide an isolated interface for discrete I/O signals. Outputs provide on/off, high/low, or open/close device control. Inputs sense the level/status of motors, valves and other equipment.

    Data Sheet
  • BusWorks 900MB

    ,

    This signal conditioner is a four-channel analog input module with four discrete outputs. It provides isolation between input, output, power, and network circuits. Network communication adheres to the industry-standard RS-485Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

    Data Sheet
  • BusWorks 900MB Limit Alarm

    ,

    This signal conditioner is a four-channel analog input module with four discrete outputs. It provides isolation between input, output, power, and network circuits. Network communication adheres to the industry-standard RS-485Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

    Data Sheet
  • BusWorks 900PB

    ,

    This signal conditioner is a four-channel analog input module with four discrete outputs. It provides isolation between input, output, power, and network circuits. Network communication adheres to the industry-standard RS-485Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

    Data Sheet
  • BusWorks XT

    ,

    These high-performance, space saving remote I/O modules interface with up to 8 differential channels of DC current input or DC voltage input unit.

    Data Sheet
  • EIS

    ,

    The EIS-408 is an 8-port web-managed industrial switch. It supports many powerful industrial Ethernet features such as redundant ring technology, port VLAN, Quality of Service (QoS), Internet Group Management Protocol (IGMP) Snooping, and failure alarm by relay output.

    Data Sheet
  • EtherStax ES2000

    ,

    High density digital I/O with up to 96 channels/unit for cost/space-efficiency. These units provide an easy way to interface a very large quantity of discrete I/O to your control system. Rugged design supports redundant power and communication.

    Data Sheet
  • Flat Pack

    ,

    These models convert sensor inputs to proportional process current or voltage output signals.

    Data Sheet