Signal Conditions and Transmitters

View: 10 / 20 / ALL

  • 600

    ,

    These units convert a 4-20mA process current input into two identical isolated 4-20mA output signals. Each channel operates independently and is isolated from the others to prevent interaction between channels.

    Data Sheet
  • BusWorks 900MB Limit Alarm

    ,

    This signal conditioner is a four-channel analog input module with four discrete outputs. It provides isolation between input, output, power, and network circuits. Network communication adheres to the industry-standard RS-485Modbus RTU protocol. AC and DC power sources are supported with nonpolarized, diode-coupled terminals.

    Data Sheet
  • Flat Pack

    ,

    These models convert sensor inputs to proportional process current or voltage output signals.

    Data Sheet

  • IntelliPack 800A

    ,

    IntelliPack alarms compare inputs against userdefined limit setpoints to control built-in relays.

    Each unit offers a selection of input ranges and alarm functions to handle a broad range of applications. As your needs change, you can easily reconfigure the unit for different ranges or functions. Alarm functions available on all models include on/off controller, limit alarm, window alarm, deviation alarm, rate-of-change alarm, and peak/valley detection.

    Data Sheet
  • IntelliPack 800T

    ,

    The 811T transmitters isolate and convert sensor inputs to noise-free, proportional DC current or voltage output signals. An optional relay output adds a local limit alarm function.

    Data Sheet
  • microBlox uBTA

    ,

    The uBTA carriers are used with Acromag’s microBlox® signal conditioning modules to create powerful alarms that also provide a voltage/current transmitter output. The plug-in modules offer the convenience of wireless field programming on a smartphone or tablet.

    Data Sheet Data Sheet 2
  • SP230

    ,

    The SP233 model is a high-performance signal splitter that converts one millivolt or thermocouple sensor input into two proportional isolated 4-20mA control signals. Power is received from one or both output loop currents.

    Data Sheet
  • SP330

    ,

    The SP333 is a high-performance signal splitter that converts one millivolt or thermocouple input into two isolated proportional control signals. A variety of current and voltage output ranges are supported. Power connects on a terminal block, a rail bus, or both for redundancy.

    Data Sheet
  • ST130

    ,

    The ST132 is a low-cost two-wire transmitter that converts a millivolt or thermocouple sensor input to a proportional 4-20mA control signal. Power is received from the output loop current. The transmitter performs signal linearization, cold-junction compensation, and lead-break detection functions.

    Data Sheet
  • TT200

    ,

    The TT236 model is a space-saving two-wire transmitter that isolates and converts a DC current or low voltage input to a proportional 4-20mA control signal. A single unit supports both voltage and current input for extra flexibility. Power is received from the output loop current or a DC supply when using a three-wire connection.

    Data Sheet