Flow Instruments

view style:

View: 10 / 20 / ALL

  • Gems FS-10798 Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Air/Gas, Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-10798 switches are externally adjustable for water, oils, and gases. This makes them ideal for protecting machine tools from coolant flow failure, protecting bearings from loss of lubricant, or assuring proper air flow. They offer an infinite number or flow settings at pressures up to 1000psig, with low pressure drop and precise repeatability. The adjusting vane is easily field adjustable using an ordinary flat-bladed screwdriver. The adjustment is set-screw-locked for tamper-free operation after field calibration.

  • Gems FS-150 Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-150 switches have a straight flow path with low pressure drop. They incorporate a unique, dual-diameter, internal bore and piston configuration to minimize flow constriction. Liquids are able to smoothly pass around the piston and flow through the switch with little pressure loss to the down stream line.

  • Gems FS-200 Flow Switch

    Item Type Media Type Connection Size Technology
    Hazardous Location, Industrial, OEM Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1 - 1 1/2, 2 - 3 Shuttle

    Gems® type FS-200 switches are general purpose, straight-through flow path switches. They offer accurate flow detection, with 1% repeatability, over a broad range of flow settings and port sizes. Their durable construction delivers long-life reliability in either water or oil. Generous flow paths keep pressure drop low. These switches are ideal for detection of improper flow rates in high volume lubrication, cooling, or process systems. They are available in a fixed or adjustable setting type.

  • Gems FS-380 Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-380 switches are compact flow switches for high inline pressures. They require 100 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The one-piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment. It is also an excellent choice for semicon cooling applications where simple design and reliable operating are required.

  • Gems FS-380p Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-380P switches industrial strength inline plastic flow switches offer the same superior performance to non-clogging as their metal cousins (FS-380). The fixed set point and simple design make them dependable switches. The FS-380P is an ideal choice for coolant applications requiring reliable flow detection in HVAC, semiconductor, welding, medical and other industries. ¼” quick disconnect units have a host of snap-on mating adapters to fit most piping requirements.


  • Gems FS-4 Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-4 switches are low cost, molded plastic construction that make flow protection economical for a broad range of industrial applications such as welders, lubrication systems, medical sterilizers, and laundry chemicals dispensing.

  • Gems FS-400 Flow Switch

    Item Type Media Type Connection Size Technology
    Hazardous Location, Industrial, OEM Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Shuttle

    Gems® type FS-400 switches are general purpose, 90° flow path switches. They provide accurate flow detection in water and oil with 1% repeatability. Flow settings on the adjustable version can be easily changed without disassembly. A shuttle bypass vane inside the housing is controlled externally using an ordinary flat-blade screwdriver. These switches are ruggedly constructed of non-corrosive materials and resist shock and vibration. Suitable for triggering alarms on interlocking shutdown circuitry when flow rate is improper to protect bearings, gears, and cooling systems.

  • Gems FS-400p Flow Switch

    Item Type Media Type Connection Size Technology
    Industrial, OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2 Shuttle

    Gems® type FS-400P switches are low cost units for plastic piping. They are designed for low cost flow/no-flow monitoring. This series is available with a clear transparent PVC housing which is ideal for use where visual flow confirmation is desirable. These corrosion-resistant switches offer broad chemical compatibility. With only one moving part, their rugged construction offers long life with minimum maintenance. They are ideal for water heating or purification, equipment cooling and general chemical processing use.

  • Gems FS-480 Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-480 switches are stainless steel flow switches for large flow and low pressure drop. They are 25% larger than their FS-380 siblings and ideal for processes that push more fluid through their systems and demand low pressure drops. Designed to accommodate the semiconductor industry’s move to larger 300mm wafer & cross-over equipment, this switch is also perfect for critical medical equipment applications. A glass-reinforced PPS piston and forged 316 stainless steel body make this sensor rugged enough for high pressure lubrication and cooling systems as well. This simple, yet meticulously perfected design provides the reliability required in critical applications while allowing for much lower pressure drop rates than other switches.

  • Gems FS-500 Flow Switch

    Item Type Media Type Connection Size Technology
    Industrial, OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Shuttle

    Gems® type FS-500 switches are low cost units for threaded plastic piping. They offer low cost flow monitoring with a variety of switch actuation points and low pressure drop. All wetted parts are polypropylene or stainless steel, making this switch ideal for a wide range of chemical and temperature requirements. The materials are also NSF or FDA approved for potable water treatment applications including chlorinators, purifiers, and heaters. The FS-500 is ideal for equipment cooling including welders, lasers, etc. A J-box version with a 5 amp relay is also available for direct control of higher electrical loads, such as chlorinator pumps.

  • Gems FS-550 Flow Switch

    Item Type Media Type Connection Size Technology
    Hazardous Location, Industrial, OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1 - 1 1/2 Paddle

    Gems® type FS-550 high pressure, metal paddle switches sense liquid flow in either direction to monitor flow/no-flow conditions. They are supplied in two paddle lengths. The paddle is trimmed during installation to permit switch actuation at the desired flow rate. As flow increases in a pipe, the paddle of the switch pivots to move out of the liquid path, producing less than 3psig of pressure drop regardless of pipe size.

  • Gems FS-600 Flow Switch

    Item Type Media Type Connection Size Technology
    Industrial, OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids, Water (Dirty) 1/8 - 3/4, 1 - 1 1/2 Thermal Dispersion

    Gems® type FS-600 switches use proven thermal dispersion technology to provide a robust no moving part flow switch even without filtration. The solid state sensor is compatible with both conductive and non-conductive fluids. It is suitable for fluids with particulates or slurries, and is immune to changes in media viscosity. The straight through switch is designed for a long life and can be mounted in any orientation to handle a wide range of flow rates. No moving parts means years of reliable service.

  • Gems FS-925 Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Air/Gas, Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-925 general purpose switches provide reliable and consistent performance with repeatability within 1%. They are factory preset for actuation at specified flow rates. They provide accurate detection of excessive or insufficient flow rates in such applications as: protecting against loss of fluid flow in hydraulic systems, assuring proper coolant flow in semiconductor processing equipment, monitoring high pressure lubrication systems, and ensuring proper air flow in water/waste systems.

  • Gems FS-926 Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Air/Gas, Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-926 low flow switches provide reliable and consistent performance with repeatability within 1%. They are factory preset for actuation at specified flow rates. They provide accurate detection of excessive or insufficient flow rates in such applications as: protecting against loss of fluid flow in hydraulic systems, assuring proper coolant flow in semiconductor processing equipment, monitoring high pressure lubrication systems, and ensuring proper air flow in water/waste systems.

  • Gems FS-927 Flow Switch

    Item Type Media Type Connection Size Technology
    OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-927 compact switches measure only 1″ x 2¾” and are ideal for use where space is at a premium. Designed for use with water and oil, these switches are suitable for high volume OEM applications. They are ideal for coolant or lubricant flow monitoring in portable equipment and many other applications with space constraints.

  • Gems FS-930 Flow Switch

    Item Type Media Type Connection Size Technology
    Hazardous Location, OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Piston

    Gems® type FS-930 oil flow switches compensate for viscosity change in fluids. Their unique, patented design assures accuracy witin 20% over a full range of viscosities – from 40 to 2000 SSU. They are ideal for use in applications where liquids of different viscosities are blended, or for use in lubrication systems where oil flow monitoring is critical at start-up. Each unit is factory preset using 300 SSU oil for actuation at specified flow rates and compensates for viscosity changes automatically.

  • Gems FT-110 Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Turbine

    Gems® type FT-110 TurboFlow® economical flow-rate sensors are ideal for OEM applications involving low flow liquid monitoring and are available in either a brass or Nylon 12 plastic body. Their low cost coupled with ½% repeatability make them ideal candidates for replacing dispensing timer systems. Unlike existing timing systems, turbine technology is not influenced by changes in system pressure caused by aging filters. The sensor’s standard power and output specifications make it easy to retrofit to existing controllers.

  • Gems FT-210 Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Water (Clean) or Similar Liquids 1/8 - 3/4 Turbine

    Gems® type FT-210 TurboFlow® low flow turbine sensors feature proven turbine technology in a small package for low flow applications. The turbine technology provides a highly repeatable sensor ideally suited for measurement of either volume dispensing and/or flow rate applications. The small turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested, ensuring years of service life.

     

  • Gems FT-330 Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Water (Clean) or Similar Liquids 1/8 - 3/4 Turbine

    Gems® type FT-330 are highly accurate and repeatable hall effect turbine flow sensors designed for low flow OEM applications. These low cost, NSF Std. 61 listed flow sensors are ideal for water or beverage dispensing applications or any application with water based liquids. The 316SS shaft coupled with Delrin®bearings allows for accurate measurements during quick dispensing cycles. The sensor’s standard power and output specifications make it easy to retrofit existing controllers.

  • Gems RFA Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Liquid

    Gems® type RFA flow meters combine high visibility rotors with solid-state electronics packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation, all with an unprecedented price/performance ratio. RFA types feature a 0 to 10 VDC analog output which is proportional to flow rate.