-
Gems FT-110 Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Turbine Gems® type FT-110 TurboFlow® economical flow-rate sensors are ideal for OEM applications involving low flow liquid monitoring and are available in either a brass or Nylon 12 plastic body. Their low cost coupled with ½% repeatability make them ideal candidates for replacing dispensing timer systems. Unlike existing timing systems, turbine technology is not influenced by changes in system pressure caused by aging filters. The sensor’s standard power and output specifications make it easy to retrofit to existing controllers.
-
Gems FT-210 Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Water (Clean) or Similar Liquids 1/8 - 3/4 Turbine Gems® type FT-210 TurboFlow® low flow turbine sensors feature proven turbine technology in a small package for low flow applications. The turbine technology provides a highly repeatable sensor ideally suited for measurement of either volume dispensing and/or flow rate applications. The small turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested, ensuring years of service life.
-
Gems FT-330 Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Water (Clean) or Similar Liquids 1/8 - 3/4 Turbine Gems® type FT-330 are highly accurate and repeatable hall effect turbine flow sensors designed for low flow OEM applications. These low cost, NSF Std. 61 listed flow sensors are ideal for water or beverage dispensing applications or any application with water based liquids. The 316SS shaft coupled with Delrin®bearings allows for accurate measurements during quick dispensing cycles. The sensor’s standard power and output specifications make it easy to retrofit existing controllers.
-
Gems RFA Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Liquid 1/4, 1/2-3/4 Paddle Wheel Gems® type RFA flow meters combine high visibility rotors with solid-state electronics packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation, all with an unprecedented price/performance ratio. RFA types feature a 0 to 10 VDC analog output which is proportional to flow rate.
-
Gems RFO Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2 Paddle Wheel Gems® type RFO flow meters combine high visibility rotors with solid-state electronics packaged into compact, panel mounting housings. They provide accurate flow rate output with integral visual confirmation, all with an unprecedented price/performance ratio. RFO types feature a VDC pulsed output.
-
GPI 01 Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Water (Clean) or Similar Liquids 1 - 1 1/2 Paddle Wheel GPI® type 01 Series electronic digital flow meters come in the 01N water meter model and the 01A fuel meter model. Both work well on any pump or gravity feed system with at least 3-30 GPM (10-100 LPM) flow range.
-
GPI A1 Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1 - 1 1/2, 2 - 3 Paddle Wheel GPI® type A1 Series commerical grade flow meters are designed as self-contained, battery powered units. These indicating meters come in Aluminum or Nylon.
-
GPI G Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Turbine GPI® type G Series precision flow meters are the most accurate of the GPI turbine meters with a traditional design. These meters come in a variety of sizes and fitting options including BSP, ISO, NPT, and ANSI Flange fittings. The GSCPS in this section carries the 3A Sanitary Rating. These meters are available in threaded, sanitary clamp, and flange models.
-
GPI G2 Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Paddle Wheel GPI® type G2 Series industrial grade flow meters can be designed to match specific applications. Turbine choice depends on flowrate, line size, pressure rating, fitting type, chemical compatibility and temperature range. These meters offer high accuracy at a lower cost, are compact, field serviceable, and include a self-contained design.
-
GPI GM Flow Meter
Flow MetersMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Viscous Liquid (Oils, Syrups, etc.) 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Positive Displacement GPI® type GM Series oval gear flow meters are designed for low flow and high accuracy. GM series meters are great for viscous fluids. Units are available with pulse output from either a Reed Switch or Hall Effect Sensor..
Select Filters Below
Product Categories
- Uncategorized
- Shop
- Pressure Instruments
- Temperature Instruments
- Flow Instruments
- Level Instruments
- Process Control
- Sanitary Instruments
- Valves
- Test Equipment
- Specialty Items