Gems FS-200 Flow Switch
Gems® type FS-200 switches are general purpose, straight-through flow path switches. They offer accurate flow detection, with 1% repeatability, over a broad range of flow settings and port sizes. Their durable construction delivers long-life reliability in either water or oil. Generous flow paths keep pressure drop low. These switches are ideal for detection of improper flow rates in high volume lubrication, cooling, or process systems. They are available in a fixed or adjustable setting type.
Data SheetAdditional information
| Manufacturer | |
|---|---|
| Series | |
| Item Type | Hazardous Location, Industrial, OEM |
| Media Type | Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids |
| Connection Size | 1 – 1 1/2, 2 – 3 |
| Technology | Shuttle |
| Body Material | Brass/Bronze, Stainless Steel |
| Switch Type | SPDT |
| Setpoint Type | Adjustable, Fixed |
Gems FS-200 Data SheetRelated Products
-
Gems FS-480 Flow Switch
Flow SwitchesItem Type Media Type Connection Size Technology OEM Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Piston Gems® type FS-480 switches are stainless steel flow switches for large flow and low pressure drop. They are 25% larger than their FS-380 siblings and ideal for processes that push more fluid through their systems and demand low pressure drops. Designed to accommodate the semiconductor industry's move to larger 300mm wafer & cross-over equipment, this switch is also perfect for critical medical equipment applications. A glass-reinforced PPS piston and forged 316 stainless steel body make this sensor rugged enough for high pressure lubrication and cooling systems as well. This simple, yet meticulously perfected design provides the reliability required in critical applications while allowing for much lower pressure drop rates than other switches.
Data Sheet -
Gems FS-930 Flow Switch
Flow SwitchesItem Type Media Type Connection Size Technology Hazardous Location, OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Piston Gems® type FS-930 oil flow switches compensate for viscosity change in fluids. Their unique, patented design assures accuracy witin 20% over a full range of viscosities – from 40 to 2000 SSU. They are ideal for use in applications where liquids of different viscosities are blended, or for use in lubrication systems where oil flow monitoring is critical at start-up. Each unit is factory preset using 300 SSU oil for actuation at specified flow rates and compensates for viscosity changes automatically.
Data Sheet -
Harwil Q-16 Flow Switch
Flow SwitchesItem Type Media Type Connection Size Technology Industrial, OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1 - 1 1/2 Paddle 
Harwil® type Q-16 switches are used to signal, start, or stop electronically operated equipment when flow or no-flow conditions occur. Harwil’s patented elastomeric sealing system is superior to the metal bellows that are subject to metal fatigue and corrosion. This seal system has been field-proven for over a decade.
Buy Now Data Sheet -
Harwil Q-12N/Q12CR Flow Switch
Flow SwitchesItem Type Media Type Connection Size Technology OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Paddle Harwil® type Q-12N & Q-12CR switches are provided with three factory adjustable parameters – paddle area, length, & stiffness – which provide performance flexibility to meet a multitude of applications. A positive stop eliminates fatigue effects of turbulence, vibration, and flow surge on flow detecting element. They have a very low pressure drop, typically less than 1.0psig at normal flow rate. Their small size and low profile provides easy mounting in crowded installations.
Data Sheet
