Wholesale distributor of pressure, temperature, flow, and level instrumentation since 1989.
Flow Instruments
Showing 25–36 of 80 results
-
Gems RFS Flow Switch
Gems® type RFS RotorFlow switches build an extra level of reliability and protection into your equipment. Once set to a desired actuation point, RotorFlow will switch to a “no-flow” condition should the rotor stop for any reason. Typical applications include semiconductor processing equipment, lasers, medical equipment, X-ray and other high power tubes, and robotic welding equipment.
Button TextItem Type Media Type Connection Size Technology Industrial, OEM Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2 Paddle Wheel -
GPI 01 Flow Meter
GPI® type 01 Series electronic digital flow meters come in the 01N water meter model and the 01A fuel meter model. Both work well on any pump or gravity feed system with at least 3-30 GPM (10-100 LPM) flow range.
Button TextMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Water (Clean) or Similar Liquids 1 - 1 1/2 Paddle Wheel -
GPI A1 Flow Meter
GPI® type A1 Series commerical grade flow meters are designed as self-contained, battery powered units. These indicating meters come in Aluminum or Nylon.
Button TextMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1 - 1 1/2, 2 - 3 Paddle Wheel -
GPI G Flow Meter
GPI® type G Series precision flow meters are the most accurate of the GPI turbine meters with a traditional design. These meters come in a variety of sizes and fitting options including BSP, ISO, NPT, and ANSI Flange fittings. The GSCPS in this section carries the 3A Sanitary Rating. These meters are available in threaded, sanitary clamp, and flange models.
Button TextMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Turbine -
GPI G2 Flow Meter
GPI® type G2 Series industrial grade flow meters can be designed to match specific applications. Turbine choice depends on flowrate, line size, pressure rating, fitting type, chemical compatibility and temperature range. These meters offer high accuracy at a lower cost, are compact, field serviceable, and include a self-contained design.
Button TextMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Paddle Wheel -
GPI GM Flow Meter
GPI® type GM Series oval gear flow meters are designed for low flow and high accuracy. GM series meters are great for viscous fluids. Units are available with pulse output from either a Reed Switch or Hall Effect Sensor..
Button TextMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Viscous Liquid (Oils, Syrups, etc.) 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Positive Displacement -
GPI LM Flow Meter
GPI® type LM Series mechanical lube flow meters are compact meters perfect for metering engine oils or transmission fluids (maximum viscosity 1000cps). The LM50M Mechanical Meter is suitable for hazardous locations. Choose the LM50P when Pulse Out without Display meets your application. The LM50D model includes an easy-to-read display. All meters are designed with oval rotors for optimum accuracy.
Button TextMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Viscous Liquid (Oils, Syrups, etc.) 1/8 - 3/4 Positive Displacement -
GPI QMF Flow Meter
GPI® type QMF is a fixed QStar Ultrasonic flow meter model. The use of multiple processors working in parallel means that QStar achieves an extremely high measurement rate. Signal processing takes place in high performance DSPs which are extremely precise and operate at very high resolution. This enables the device to achieve internal resolution of under 0.001 m/s flow velocity. And since the transit time measurement is purely digital, the measurement electronics are virtually drift and calibration free.
Button TextMoving or Non-Moving Parts Media Type Connection Size Technology Non-Moving Parts Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Ultrasonic -
GPI TM Flow Meter
GPI® type TM Series water flow meters are accurate, economical, and designed to last. These meters are used for water processing and irrigation applications. They meet Schedule 80 PVC specifications and come standard with a low-profile display. They come in seven sizes with three fitting types, offering flowrates from 1-800 GPM.
Button TextMoving or Non-Moving Parts Media Type Connection Size Technology Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Paddle Wheel -
Harwil Q-1 Flow Switch
Harwil® type Q-1 industrial flow switches are designed for extreme, long-term reliability. They detect and signal flow change and remain continuously adjustable while in operation. Six interchangeable orifices have 2:1 continuous switch adjustment. They are calibrated independent of line pressure and temperature, and maintain calibration limits when subjected to reasonable line hydraulic hammer or surge pulses. A DPDT model is available upon request.
Button TextItem Type Media Type Connection Size Technology Industrial Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Paddle -
Harwil Q-10N/Q-10VCR Flow Switch
Harwil® type Q-10N & Q-10VCR switches are provided with three factory adjustable parameters – paddle area, length, & stiffness – which provide performance flexibility to meet a multitude of applications. They respond to fluid flow only, independent of line pressure and temperature. A positive stop eliminates fatigue effects of turbulence, vibration, and flow surge on flow detecting element. Their small size and low profile provides easy mounting in crowded installations.
Button TextItem Type Media Type Connection Size Technology OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1 - 1 1/2 Paddle -
Harwil Q-12N/Q12CR Flow Switch
Harwil® type Q-12N & Q-12CR switches are provided with three factory adjustable parameters – paddle area, length, & stiffness – which provide performance flexibility to meet a multitude of applications. A positive stop eliminates fatigue effects of turbulence, vibration, and flow surge on flow detecting element. They have a very low pressure drop, typically less than 1.0psig at normal flow rate. Their small size and low profile provides easy mounting in crowded installations.
Button TextItem Type Media Type Connection Size Technology OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Paddle