Flow Instruments

View: 10 / 20 / ALL

  • Kobold EDM Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2, 2 - 3, 4+ Paddle Wheel

    Kobold® type EDM battery powered rate meter and totalizers measure the flow of water and other compatiblie, low viscosity liquids with flow rates ranging from 0.3 to 300 GPM. Their replaceable 3V lithium batteries power an onboard rate meter/totalizer with the results displayed on a highly visible, 6-digit LCD readout. The versatile, module design offers a variety of options.

  • Kobold FPS Flow Switch

    Item Type Media Type Connection Size Technology
    Industrial Corrosive Chemicals, Water (Clean) or Similar Liquids 1 - 1 1/2 Paddle

    Kobold® type FPS paddle-bellows flow switches are used wherever reliable control for minimum or maximum liquid flow is required. The interchangeable paddles, in conjunction with an external adjustment screw, allow for adjustment over a wide range of switching points and easy adaptation of the flow switch to different pipe sizes. The internals of the instrument are separated from the process by the bellows, making it an excellent choice for dirty media. The FPS-6 Series is a special design variation used when lower switching points are desirable.

    Data Sheet
  • Kobold KAL Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Non-Moving Parts Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2 Thermal

    Kobold® type KAL thermal flow switches continuously monitor the flow of liquid media. They can be used wherever flows must be monitored with a minimal loss of pressure. The one-piece, stainless steel sensor has no moving parts, making the KAL very reliable. Strength is another advantage inherent in this design, allowing use at high pressures and virtually eliminating any chance of mechanical damage.

    Data Sheet
  • Kobold KFR Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Air/Gas, Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Variable Area

    Kobold® type KFR acrylic variable flow meters are for liquids or gases. They deliver accuracy and range availability at low cost and bridge the microflow and large flow ranges. They have a one-piece acrylic body with PVC or metal fittings, large lettering, and extra hash marks. The low flow meters offer an inherently stable float design and are also available with integral needle valves. The larger meters feature a float stabilization mechanism that enables a small installation footprint and a low price.

  • Kobold KSK Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Air/Gas, Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2 Variable Area

    Kobold® type KSK plastic flow meters and switches are for liquids and gases. They operate on the variable-area principle. The medium flows upward through a conically widening plastic measuring tube. The float is lifted by the flowing medium and indicates the instantaneous flow rate on the scale attached to the flow meter. The meters are all plastic with bodies made of Trogamid® or Polysulfone to handle aggressive media.

    Data Sheet
  • Kobold KSM Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Air/Gas, Water (Clean) or Similar Liquids 1/8 - 3/4, 1 - 1 1/2 Variable Area

    Kobold® type KSM plastic flow meters and switches are for liquids and gases and are excellent choice for applications measuring aggressive media. There are no metal parts in contact with the fluid. The standard flow meters are equipped with a scale for water or air and a percentage scale. It has two adjustable markers, a rail for accessory switches, and a PVC glue or NPT connection with capnut. A Polysulfone measuring tube is available for very corrosive media and a Trogamid-T tube is available for less aggressive media. Both are rugged and shock resistant.

    Data Sheet
  • Kobold KSV Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Air/Gas, Water (Clean) or Similar Liquids 1/8 - 3/4 Variable Area

    Kobold® type KSV economical micro flow meters measure and control low volume flows of water or air. They have a plastic body with metal fittings and are kept leak tight through the use of O-ring seals. The floats are either stainless steel, glass, or titanium. The meters come with or without a needle valve, which helps to stabilize the float during introduction of media into the meter.

  • Kobold MAS Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Non-Moving Parts Air/Gas 1/8 - 3/4 Mass

    Kobold® type MAS flow meters are for dry gases and need no pressure or temperature corrections. This makes them ideal for a wide variety of gas flow applications including general process control, flow into vacuum systems, leak testing, and flow calibration. The MAS is available in Nylon, aluminum, or stainless steel, with or without a digital display. The remote display option comes standard with 5 feet of cable, but may be ordered with up to 100 feet for remote surface mounting.

    Data Sheet
  • Kobold MIK Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Non-Moving Parts Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids, Water (Dirty) 1/8 - 3/4, 1 - 1 1/2, 2 - 3 Magnetic Inductive

    Kobold® type MIK compact magneto-inductive flow meters are used for measuring and monitoring small to medium-sized flows of conductive liquids in pipes. The measurement is not dependent on the process liquid and its material properties such as density, viscosity, and temperature. The device may be equipped with a switch, frequency, or analog output.

  • Kobold OVZ Flow Meter

    Moving or Non-Moving Parts Media Type Connection Size Technology
    Moving Parts Viscous Liquid (Oils, Syrups, etc.) 1/8 - 3/4 Paddle Wheel

    Kobold® type OVZ economical oval-gear flow meters offer the advantage of positive displacement technology at a rotameter price. Suitable for viscous media ranging from hydraulic oils to light gear oils, the OVZ eliminates problems associated with viscosity changes during operation. Typical applications include central lubrication systems for paper machines, filling transmission fluid into gearboxes, and low pressure hydraulic systems.

    Data Sheet