Gems® type PVC DIPTAPE indicators are ideal for chemical storage tanks and provide one of the best values for liquid level monitoring. These light duty versions are recommended for use in calm liquids and ambient temperature and pressure levels.
|Item Type||Media Type||Connection Size||Technology|
|OEM||Air/Gas, Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids||1/8 - 3/4||Piston|
Gems® type FS-925 general purpose switches provide reliable and consistent performance with repeatability within 1%. They are factory preset for actuation at specified flow rates. They provide accurate detection of excessive or insufficient flow rates in such applications as: protecting against loss of fluid flow in hydraulic systems, assuring proper coolant flow in semiconductor processing equipment, monitoring high pressure lubrication systems, and ensuring proper air flow in water/waste systems.
|Industrial||4/20mA, 0-5 V||1/4 NPT||1.00%|
Gems® series 865 are very low pressure transducers for ranges as low as 0.25″ WC and feature ±1% full scale accuracy. Primarily used in building energy management, these transducers are capable of measuring pressures and flows with the accuracy necessary for proper building pressurization and air flow control.
|Industrial||4/20mA, 0-5 V, 0-10 V||1/4 NPT, Manifold||1.00%|
Gems® series 830 standard differential pressure transducers are designed for wet-to-wet differential pressure measurements of liquid or gases. These units feature bleed ports that allow for total elimination of air in the line and pressure cavities. They are commonly used for liquid level measurement, filter monitoring, liquid & gas flow measurement, process control systems, and energy management systems.
|Moving or Non-Moving Parts||Media Type||Connection Size||Technology|
|Moving Parts||Water (Clean) or Similar Liquids||1/8 - 3/4||Turbine|
Gems® type FT-210 TurboFlow® low flow turbine sensors feature proven turbine technology in a small package for low flow applications. The turbine technology provides a highly repeatable sensor ideally suited for measurement of either volume dispensing and/or flow rate applications. The small turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested, ensuring years of service life.
© 2017 Kodiak Controls - All Rights Reserved.