Gems CT-1000 Level Sensor
Gems® type CT-1000 capacitive level sensors are high precision and robust sensors designed for use in continuous filling level measurement or continuous separating layer coverage. They are suitable for all electrically conductive liquids. A dual probe version is available for non-conductive tanks.
Data SheetRelated Products
-
Gems FS-930 Flow Switch
Flow SwitchesItem Type Media Type Connection Size Technology Hazardous Location, OEM Corrosive Chemicals, Viscous Liquid (Oils, Syrups, etc.), Water (Clean) or Similar Liquids 1/8 - 3/4 Piston Gems® type FS-930 oil flow switches compensate for viscosity change in fluids. Their unique, patented design assures accuracy witin 20% over a full range of viscosities – from 40 to 2000 SSU. They are ideal for use in applications where liquids of different viscosities are blended, or for use in lubrication systems where oil flow monitoring is critical at start-up. Each unit is factory preset using 300 SSU oil for actuation at specified flow rates and compensates for viscosity changes automatically.
Data Sheet -
Gems FS-380p Flow Switch
Flow SwitchesItem Type Media Type Connection Size Technology OEM Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Piston Gems® type FS-380P switches industrial strength inline plastic flow switches offer the same superior performance to non-clogging as their metal cousins (FS-380). The fixed set point and simple design make them dependable switches. The FS-380P is an ideal choice for coolant applications requiring reliable flow detection in HVAC, semiconductor, welding, medical and other industries. ¼” quick disconnect units have a host of snap-on mating adapters to fit most piping requirements.
Data Sheet -
Gems 830 Differential Pressure Transducer
Differential Pressure TransducersItem Type Output Connection Accuracy Industrial 4/20mA, 0-5 V, 0-10 V 1/4 NPT, Manifold 1.00% Gems® series 830 standard differential pressure transducers are designed for wet-to-wet differential pressure measurements of liquid or gases. These units feature bleed ports that allow for total elimination of air in the line and pressure cavities. They are commonly used for liquid level measurement, filter monitoring, liquid & gas flow measurement, process control systems, and energy management systems.
Data Sheet -
Gems FS-480 Flow Switch
Flow SwitchesItem Type Media Type Connection Size Technology OEM Corrosive Chemicals, Water (Clean) or Similar Liquids 1/8 - 3/4 Piston Gems® type FS-480 switches are stainless steel flow switches for large flow and low pressure drop. They are 25% larger than their FS-380 siblings and ideal for processes that push more fluid through their systems and demand low pressure drops. Designed to accommodate the semiconductor industry's move to larger 300mm wafer & cross-over equipment, this switch is also perfect for critical medical equipment applications. A glass-reinforced PPS piston and forged 316 stainless steel body make this sensor rugged enough for high pressure lubrication and cooling systems as well. This simple, yet meticulously perfected design provides the reliability required in critical applications while allowing for much lower pressure drop rates than other switches.
Data Sheet
