SSI® type DFT-220 ultrasonic level sensors are cost competitive non-contact liquid level drum gauges with 4-20 mA output. The DFT-220 was designed for usage on standard ANSI MH2-2004 vertical drums with ≤32″ depths. The gauge allows the user to easily select between the following vertical drum settings: 15, 30, or 55 gallon and 57, 114, or 208 liter. It is not intended for use with gasoline.
[button href=”https://kodiakcontrols.com/wp-content/uploads/2018/01/DFT-220-Spec-1.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
| Manufacturer | |
|---|---|
| Series | |
| Moving or Non-Moving Parts | Non-Moving Parts |
| Technology | Ultrasonic |
| Media Contact | Non-Contact |
| Body Material | Plastic |
Only logged in customers who have purchased this product may leave a review.
Gems® type XM-66400 & XT-66400 large size float level sensors are designed for tanks up to eighteen feet (549cm) in depth. Heavy duty stems resist turbulence, and float options accommodate liquids with minimum specific gravity as low as 0.53. Standard resolution is ½”, higher resolutions are available upon request.
[button href=”/wp-content/uploads/2016/10/gems_xm66400_xm36490.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
| Moving or Non-Moving Parts | Technology | Body Material | Media Contact |
|---|---|---|---|
| Moving Parts | Float | Stainless Steel | Wetted |
Kobold® type NML-308 float level sensors are miniature synthetic transducers suitable for level measurement in vessels of up to 48 inches in height. Floats are made from PTFE. Tubes are 316 stainless steel clad with PFA. The use of 1¼” or 1½” NPT fitting accommodates the diameter of the float and allows the units to be installed from the top of the vessel, or mounting bracket, without removing the float. Each transducer comes standard with cable or 4-pin Micro-DC plug. The transmitted level signal is generated via a DIN rail transmitter mounted remotely.
[button href=”https://kodiakcontrols.com/wp-content/uploads/2016/10/kobold_nml308_sensor.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
| Moving or Non-Moving Parts | Technology | Body Material | Media Contact |
|---|---|---|---|
| Moving Parts | Float | Plastic | Wetted |
Gems® type CT-1000 capacitive level sensors are high precision and robust sensors designed for use in continuous filling level measurement or continuous separating layer coverage. They are suitable for all electrically conductive liquids. A dual probe version is available for non-conductive tanks.
[button href=”/wp-content/uploads/2016/10/gems_ct1000_sensor.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
| Moving or Non-Moving Parts | Technology | Body Material | Media Contact |
|---|---|---|---|
| Non-Moving Parts | Capacative | Stainless Steel | Wetted |
Kobold® type NTB pressure level sensors are designed for hydrostatic level measuring in wells, reservoirs, clarification plants, and other tanks. Compact and easy to install, the NTB is well suited for protecting submersible pumps in deep wells. The probe assembly consists of a measuring cell, two-wire transmitter, and cable with a capillary vent tube. The housing is made of stainless steel with a pressure-sensitive diaphragm protected by a stainless steel nose cone.
[button href=”/wp-content/uploads/2016/10/kobold_ntb_sensor.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
| Moving or Non-Moving Parts | Technology | Body Material | Media Contact |
|---|---|---|---|
| Non-Moving Parts | Pressure | Stainless Steel | Wetted |
Reviews
There are no reviews yet.