Wholesale distributor of pressure, temperature, flow, and level instrumentation since 1989.
Power & Electric
Showing 1–12 of 13 results
-
ATC Diversified Electronics MPA2 Motor Protection Analyzer
MPA2 is a micro-controlled based three-phase Motor Protection Analyzer Relay specifically designed to protect electric loads and motors from failure and damage due to common current and voltage faults. MPA2 constantly supervises current and voltage values. When any harmful condition occurs, the output connection is deactivated until the fault disappears, power line conditions return to an acceptable level and the motor has been totally cooled.
[button href=”https://kodiakcontrols.com/wp-content/uploads/2017/09/ashcroft-1009-4and6.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
-
Lovato CC Fuse Holder
LOVATO Electric fuse holders can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.
[button href=”/wp-content/uploads/2022/03/13Fuseholdersandfuses_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series Item Type Lovato FB01G Fuse Holders -
Lovato FB01F1 Series Migdet Fuse Holder
LOVATO Electric fuse holders can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.
[button href=”/wp-content/uploads/2022/03/13Fuseholdersandfuses_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series Item Type Lovato FB01F Fuse Holders -
Lovato FB04D1P Series Fuse Holder
Fuse holder for photovoltaic applications, for 10X85mm and 14X85mm fuses. 32A rated current at 1500VDC, 1P. Without status indicator. 1 module
[button href=”/wp-content/uploads/2022/03/13Fuseholdersandfuses_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series Item Type Lovato FB04D1P Fuse Holders -
Lovato FB04D1PL Series Fuse Holder
Fuse holder for photovoltaic applications, for 10X85mm and 14X85mm fuses. 32A rated current at 1500VDC, 1P. With status indicator. 1 module[button href=”/wp-content/uploads/2022/03/13Fuseholdersandfuses_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series Item Type Lovato FB04D1P Fuse Holders -
Lovato P1MB1PC Series Miniature Circuit Breakers
These devices are used to protect against short circuits and overloads of wiring installations and loads in panel boards, office buildings, stores and similar applications. Their purpose is circuit protection, circuit isolation and load operation controls.
[button href=”/wp-content/uploads/2022/03/14Miniatureandresidualcircuitbreakers_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series certifications Lovato P1MB1PC cURus, CE, TUV -
Lovato P1MB3PC Series Miniature Circuit Breakers
These devices are used to protect against short circuits and overloads of wiring installations and loads in panel boards, office buildings, stores and similar applications. Their purpose is circuit protection, circuit isolation and load operation controls.
[button href=”/wp-content/uploads/2022/03/14Miniatureandresidualcircuitbreakers_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series certifications Lovato P1MB3PC cURus, CE, TUV -
Lovato P1MBUH1PC Series Miniature Circuit Breakers
These devices are used to protect against short circuits and overloads of wiring installations and loads in panel boards, office buildings, stores and similar applications. Their purpose is circuit protection, circuit isolation and load operation controls.
[button href=”/wp-content/uploads/2022/03/14Miniatureandresidualcircuitbreakers_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series certifications Lovato P1MBUH1PC cULus, EAC -
Lovato P1MBUH3PC Series Miniature Circuit Breakers
These devices are used to protect against short circuits and overloads of wiring installations and loads in panel boards, office buildings, stores and similar applications. Their purpose is circuit protection, circuit isolation and load operation controls.
[button href=”/wp-content/uploads/2022/03/14Miniatureandresidualcircuitbreakers_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series certifications Lovato P1MBUH3PC cULus, EAC -
Lovato P1RD Series Miniature Residual Current Operated Circuit Breakers
The introduction of the new P1RD… type enable installation of auxiliary contacts and connection of both residual current operated and miniature circuit breakers on a single power bar.
They are available up to 63A, in 2 and 4 pole versions with AC or A class tripping, and for residual class tripping, and for residual currents of 30mA and 300mA. A device to padlock the lever is also available.
[button href=”/wp-content/uploads/2022/03/14Miniatureandresidualcircuitbreakers_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series certifications Lovato P1RD TÜV-Rheinland (types AC and A), EAC -
Lovato P1RE Series Miniature Residual Current Operated Circuit Breakers with Overload Protection
The new P1RE… type offers the option of installing auxiliary contacts and features a double actuator lever to differentiate residual current operation from overload protection. They also feature a new isolating barrier on the connection terminals. This means that the protection rating of IP20 covers not just the front of the product but also the connection terminals, which maintain the protection rating whatever cable cross section is used.
They are available up to 40A in the 1P+N version with AC or A class tripping, for residual currents of 30mA and 300mA and a type C thermal trip curve
[button href=”/wp-content/uploads/2022/03/14Miniatureandresidualcircuitbreakers_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series certifications Lovato P1RE TÜV-Rheinland (types AC and A), EAC -
Lovato PSE Series Switching Power Supplies
LOVATO Electric Switching power supplies transform an AC input voltage into a DC output one. This type of equipment is used in industrial and domestic automation fields. The power supplies are equipped with switching technology offering very high efficiency in an extremely compact size.
[button href=”/wp-content/uploads/2022/03/23Switchingpowersupplies_10_21.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Manufacturer Series Item Type Lovato PSE Switching Power Supplies