Pressure Instruments

View: 10 / 20 / ALL

  • Plast-O-Matic GGS Diaphragm Seal

    , ,
    Item Type Style Connection Wetted Material
    Industrial Clamped Threaded Plastic

    Plast-O-Matic® series GGS gauge guards should be used to isolate and protect pressure or vacuum instruments used on ultra-pure or highly corrosive fluid lines. They can be confidently used with liquids such as de-mineralized water, sulphuric acid, hydrochloric acid, and caustics. Utilization of Plast-O-Matic gauge guards offers the added advantage of protection against clogging of instruments caused by suspended solids or highly viscous fluids. Plast-O-Matic gauge guards are available with or without gauges.

    Data Sheet
  • Noshok 5 Diaphragm Seal

    , ,
    Item Type Style Connection Wetted Material
    Industrial Clamped Threaded Plastic

    Noshok® series 5 plastic diaphragm seals are constructed from corrosion-resistant PP glass fiber reinforced upper housing and PP, PVC, or PVDF lower housing. They are used for wastewater and chemical feed applications, as well as most applications with a corrosive media which includes deionized water systems, reverse osmosis systems, desalinization systems, and electroplating.

    Data Sheet
  • Plast-O-Matic GGMU Diaphragm Seal

    , ,
    Item Type Style Connection Wetted Material
    Flow Through Clamped Threaded Plastic

    Plast-O-Matic® series GGMU gauge guards are designed for ultra-pure liquid systems and to eliminate piping dead-leg that can harbor bacterial growth or other contamination. This is in addition to their basic function of keeping system liquid from coming in contact with a pressure (vacuum) gauge or other pressure instrument while still maintaining the accuracy of the gauge or instrument.

    Data Sheet
  • SSI Technologies MG1 Digital Pressure Gauge

    Dial Size Connection Mounting Accuracy
    2.5"(63mm) 1/4 NPT Lower 1.0% FS (Grade 1A)

    SSI® MG1-9V digital pressure gauges are stand alone 9V battery operated multi-functional gauges. They have a standard input pressure port made of 316L stainless steel which has better pitting corrosion resistance in some media, such as seawater. This makes them well suited for marine applications.

    Data Sheet Buy Now
  • Gems 3100/3200 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0.5-4.5 V, 0-10 V, 0.5-4.5 V Ratiometric 1/8 NPT, 1/4 NPT, BSP, SAE, Other 0.25%, 0.50% 15-10000 psi, Vacuum or Compound, Custom

    Gems® series 3100 & 3200 series sputtered thin film units offer unbeatable price performance in a compact construction for OEMs that need consistent high levels of performance, reliability, and stability. The 3200 series features thicker diaphragms and a pressure restrictor to withstand the rigors of cavitations or extreme pressure spikes.

    Data Sheet
  • Gems 31EP Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0.5-4.5 V, 0-10 V, 0.5-4.5 V Ratiometric 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other 0.25% 15-10000 psi

    Gems® series 31EP and 32EP are CSA approved explosion proof, while the 31EA and 32EA carry the ATEX approval. They all feature all stainless steel wetted parts, a broad selection of pressure connections and a wide choice of electrical outputs — the 32 Series of each group provides higher proof pressures. The compact yet rugged construction of these units makes them ideal for installation where space in a hazardous environment is at a premium.

    Data Sheet
  • Kodiak KC201 Industrial Pressure Gauge

    Dial Size Connection Mounting Case Material
    1.5"(40mm), 2.0"(50mm), 2.5"(63mm), 4.0"(100mm) 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other Lower Stainless Steel

    Kodiak’s 200 series pressure gauges are designed to meet the demands of heavy duty industrial applications. This series gauge is commonly used on hydraulic and pneumatic applications, pumps, compressors, chillers, or any other application that has vibration or needs a hermetically sealed industrial pressure gauge.

    Data Sheet
  • SSI Technologies MG-9V Digital Pressure Gauge

    Dial Size Connection Mounting Accuracy
    3.0" 1/4 NPT Lower 0.25% FS (Grade 3A)

    SSI® MG-9V digital pressure gauges are stand alone 9V battery operated multi-functional gauges. They are well suited for a variety of commercial and industrial applications such as refrigeration, compressors, pumps, hydraulics, pneumatics, and waste water.

    Data Sheet Buy Now
  • Anfield T200 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0.5-4.5 V, 0-10 V 1/4 NPT, BSP, SAE 0.50% 15-10000 psi, Vacuum or Compound, Custom

    Anfield® series T200 pressure transducers are ideally suited for the industrial application where space constraints require a small body size. They are commonly used in industrial equipment, safety monitoring, and mobile equipment.

    Data Sheet
  • Ashcroft B4 Pressure Switch

    ,
    Setpoint Type Deadband Connection Setpoint Ranges
    Adjustable Fixed 1/4 NPT, 1/2 NPT, SAE, Tri-Clamp < 150 psi, 150-3000 psi, Inches of H2O, Vacuum

    Ashcroft® series B pressure switches have proven reliable in such harsh environments as: offshore oil rigs, chemical and petrochemical plants, pulp and paper mills, steel mills, power plants, water and sewage treatment plants, and other corrosive environments.

    Data Sheet
  • Ashcroft B7 Pressure Switch

    ,
    Setpoint Type Deadband Setpoint Ranges Item Type
    Adjustable Fixed < 150 psi, 150-3000 psi, Inches of H2O, Vacuum

    Ashcroft® series B pressure switches have proven reliable in such harsh environments as: offshore oil rigs, chemical and petrochemical plants, pulp and paper mills, steel mills, power plants, water and sewage treatment plants, and other corrosive environments.

    Data Sheet
  • Gems 31CS / 32CS Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0.5-4.5 V, 0-10 V, 0.5-4.5 V Ratiometric 1/8 NPT, 1/4 NPT, BSP, SAE, Other 0.25% 15-10000 psi, 15000+ psi

    Gems® series 31CS sputtered thin film units offers consistent high levels of performance, reliability, and stability. The 32CS series features a thicker diaphragm and a pressure restrictor to withstand the rigors of cavitation or extreme pressure spikes. The compact construction of both these series makes them ideal for installation where space is at a premium, and they are fully RoHS compliant.

    Data Sheet
  • Kodiak KC301 Industrial Pressure Gauge

    Dial Size Connection Mounting Case Material
    1.5"(40mm), 2.0"(50mm), 2.5"(63mm), 4.0"(100mm) 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other Lower, Back Stainless Steel

    Kodiak’s 301 stainless steel liquid filled pressure gauges are designed to meet the demands of heavy duty industrial applications where brass wetted parts will not do. This series gauge offers 316SS wetted parts and is commonly used on hydraulic and pneumatic applications, pumps, chemical feed systems, R/O systems, or any corrosive application where a stainless steel connection is needed.

    Data Sheet Buy Now
  • Kodiak KCDG15 Digital Pressure Gauge

    Dial Size Connection Mounting Accuracy
    1.5"(40mm) 1/8 NPT, 1/4 NPT Back 1.0% FS (Grade 1A)

    Kodiak’s Series KCDG15 digital pressure gauges offer high performance with 1.0% full scale accuracy in a compact size allowing for versatility in multiple applications. The KCDG15 is commonly used on pneumatic regulators, filters, compressors, or any application where brass is acceptable for air or other gases.

    Data Sheet Buy Now
  • Noshok 100 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA 1/8 NPT, 1/4 NPT, BSP, SAE 0.50% 1-10 psi, 15-10000 psi, Vacuum or Compound

    Noshok® series 100 feature current output, stainless steel wetted parts, and are CE compliant to suppress RFI, EMI and ESD. They are commonly used for HVAC, hydraulics & pneumatics, injection molding machines, railroad equipment, and stamping and forming presses.

    Data Sheet
  • Noshok 300 Specialty Pressure Gauge

    Dial Size Mounting Wetted Material Ranges
    2.5"(63mm), 4.0"(100mm) Lower, Back, Panel Mount Brass 15-1000 psi, Vacuum or Compound

    The Noshok® 300 brass cast gauges are commonly used in automotive, construction, hydraulics and pneumatics, mining, stamping and forming presses, and transportation applications. They are high-quality, heavy duty liquid filled gauges.

    Data Sheet
  • Weksler Glass 45PL Process Pressure Gauge

    Dial Size Connection Accuracy Ranges
    4.5" 1/4 NPT, 1/2 NPT 0.5% FS (Grade 2A) 15-1000 psi, 1500-10000 psi, Vacuum or Compound

    Weksler Glass® 45PL & 45LL process pressure gauges are commonly used in industrial applications where standard pressure gauges won't do. Their case material, accuracy and size help make them extremely durable and long lasting in harsh environments. The 45PL is a dry case and the 45LL can be filled.

    Data Sheet
  • Anfield SMA Pressure Switch

    Setpoint Type Deadband Connection Setpoint Ranges
    Adjustable, Fixed Fixed 1/8 NPT, 1/4 NPT, BSP, SAE, Other < 150 psi, 150-3000 psi, > 5000 psi

    Anfield® series SMA are versatile pressure switches suitable for many hydraulic and pneumatic applications. They utilize a proven piston/diaphragm design to provide excellent accuracy and high proof pressures with zero leakage. Various electrical terminations are available utilizing a high quality snap action micro switch.

    Data Sheet
  • Ashcroft 1020 Christmas Tree Gauge

    Dial Size Connection Accuracy Ranges
    4.5" 1/4 NPT, 1/2 NPT 1.0% FS (Grade 1A) 15-1000 psi, 1500-10000 psi, 15000+ psi

    The Ashcroft® 1020 christmas tree gauge is used specifically within oil and gas fields. This model requires minimal field maintenance due to its design, providing a safe and reliable instrument platform. An ideal pressure gauge for satisfying challenging applications.

    Data Sheet
  • Ashcroft 1109 Pressure Gauge

    Dial Size Connection Accuracy Ranges
    4.5" 1/4 NPT, 1/2 NPT 0.5% FS (Grade 2A) 15-1000 psi, 1500-10000 psi, 15000+ psi, Vacuum or Compound

    The Ashcroft® 1109 pressure gauge is a rugged instrument and an ideal choice when an ASME gauge with a solid front stainless steel case is a requirement. This model combines elements of reliability, performance and safety. An ideal product that serves extremely well on challenging installation points.

    Data Sheet
  • Ashcroft 1279 Process Pressure Gauge

    Dial Size Connection Accuracy Ranges
    4.5" 1/4 NPT, 1/2 NPT 0.5% FS (Grade 2A) 15-1000 psi, 1500-10000 psi, 15000+ psi, Vacuum or Compound

    Ashcroft® 1279 process pressure gauges offer a wide variety of case styles, Bourdon tubes and pressure ranges to meet your application needs. With the component combinations available in the Duragauge line, over ten million variations are possible to serve the needs of all types of industries, including process, power, nuclear, aerospace and cryogenics.

    Data Sheet
  • Ashcroft 1290 Direct Drive Pressure Gauge

    Dial Size Connection Accuracy Ranges
    4.5" 1/4 NPT, 1/2 NPT 0.5% FS (Grade 2A) 15-1000 psi, Vacuum or Compound

    The Ashcroft® 1290 direct drive gauge is ideal on harsh applications exhibiting severe vibration or pulsation effects. The system design eliminates movement wear under high vibration process conditions.

    Data Sheet
  • Ashcroft A2X Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V, 0.5-4.5 V Ratiometric 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other 0.25%, 0.50%, 1.00% 15-10000 psi, Vacuum or Compound

    Ashcroft® A2X pressure transmitters are idea for a broad spectrum of pressure sensing requirements requiring approvals for explosion/flame proof. They are commonly used for oil field equipment, upstream oil and gas production, natural gas compression and transfer control, and alternative energy products.

    Data Sheet
  • Ashcroft D4 Differential Pressure Switch

    Item Type Switch Type Deadband Circuit
    Industrial Mechanical Fixed DPDT, SPDT

    Ashcroft® series D4 differential pressure switches use a unique, dual diaphragm-sealed piston design that features very high static operating pressures and small size. They have proven reliable in such harsh environments as: offshore oil rigs, chemical and petrochemical plants, pulp and paper mills, steel mills, power plants, water and sewage treatment plants, and other corrosive environments.

    Data Sheet
  • Ashcroft G2 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0.5-4.5 V, 0-10 V, 0.5-4.5 V Ratiometric 1/8 NPT, 1/4 NPT, BSP, SAE, Other 1.00% 15-10000 psi, Vacuum or Compound

    Ashcroft® G2 pressure transducers combine performance with value to meet the demanding needs of the following applications: off-road equipment, construction machinery, performance racing, railroad/transportation, compressor control, HVAC & refrigeration, agricultural implements, process automation & control, hydraulic & pneumatic sensing, and pump monitoring.

    Data Sheet
  • Ashcroft L Differential Pressure Switch

    Item Type Switch Type Deadband Circuit
    Industrial Mechanical Adjustable, Fixed DPDT, SPDT

    Ashcroft® series L differential pressure switches use a unique, dual diaphragm-sealed piston design that features very high static operating pressures and small size. They are currently being used successfully in pulp & paper mills, refineries, chemical & petrochemical plants, pharmaceutical plants, dairies, breweries, water & sewage treatment plants, steel mills, and other tough environments.

    Data Sheet
  • Kodiak DSM35 Diaphragm Seal

    ,
    Item Type Style Connection Wetted Material
    Mini Welded Threaded Metallic

    Kodiak’s series DSM35 mini diaphragm seals are designed for gauges 1.5″ to 3.5″ in size and are also acceptable for pressure transducer/transmitters or other small displacement instruments. They feature an all welded design, a standard pressure rating of 2500psi with 5000psi available, and a female threaded standard process connection with a male threaded connection available.

    Data Sheet
  • Kodiak KC-SPRINKLER Specialty Pressure Gauge

    Dial Size Mounting Wetted Material Ranges
    3.5" Lower Brass 15-1000 psi

    Kodiak’s 10135 sprinkler gauges are designed for use in the fire protection/sprinkler market. They are suitable for air, water, oil, gas or any other medium not corrosive to brass. Other ranges, connection locations, mounting styles and accessories available.

    Data Sheet
  • Kodiak KC101 Utility Pressure Gauge

    Dial Size Connection Mounting Case Material
    1.5"(40mm), 2.0"(50mm), 2.5"(63mm), 3.5" 1/8 NPT, 1/4 NPT, BSP, Other Lower Steel

    Kodiak’s 101 series pressure gauges are an inexpensive utility gauge used for commercial and industrial applications. This series gauge is commonly used on air, water, oil or gas applications that are compatible with brass/bronze and on applications without excessive vibration or pulsations.ns.

    Data Sheet
  • Kodiak KC202 Industrial Pressure Gauge

    Dial Size Connection Mounting Case Material
    1.5"(40mm), 2.0"(50mm), 2.5"(63mm) 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, Other Back Stainless Steel

    Kodiak’s 200 series pressure gauges are designed to meet the demands of heavy duty industrial applications. This series gauge is commonly used on hydraulic and pneumatic applications, pumps, compressors, chillers, or any other application that has vibration or needs a hermetically sealed industrial pressure gauge.

    Data Sheet
  • Noshok 615 / 616 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V, 1-11 V 1/4 NPT, 1/2 NPT, BSP, Flush, SAE 0.125%, 0.25% 1-10 psi, 15-10000 psi, 15000+ psi, Vacuum or Compound

    Noshok® series 615 & 616 feature current or voltage outputs, stainless steel wetted parts, and are CE compliant to suppress RFI, EMI and ESD. They are commonly used for construction, hydraulics & pneumatics, laboratory & test equipment, power generation, stamping & forming presses, and transportation.

    Data Sheet
  • SSI Technologies MGA Digital Pressure Gauge

    Dial Size Connection Mounting Accuracy
    2.5"(63mm) 1/4 NPT Lower 1.0% FS (Grade 1A)

    SSI® MGA-9V digital pressure gauges are stand alone 9V battery operated multi-functional gauges. They are lower cost with an accuracy of ±1.0% full scale for dry air and non-corrosive gas applications only.

    Data Sheet Buy Now
  • Ashcroft 1130 Differential Pressure Gauge

    Dial Size Mounting Ranges Wetted Material
    2.0"(50mm), 2.5"(63mm), 3.0", 3.5", 4.0"(100mm), 4.5", 6.0"(160mm) Lower, Back, In-Line, Panel Mount 15-1000 psid Aluminum, Brass, Stainless Steel

    Ashcroft® 1130 differential gauges use a piston design where small migration of the process media is permissible. They are recommended for high differential and high static pressures up to 6000psi. Body materials are available in Aluminum, Brass, and Stainless Steel, with Buna, Viton, or EPDM seals.

    Data Sheet
  • Ashcroft 4080 Indicating Pneumatic Transmitter

    Setpoint Type Deadband Connection Setpoint Ranges
    Adjustable Fixed 1/4 NPT < 150 psi, 150-3000 psi, > 5000 psi, Vacuum

    The Ashcroft® 4080 indicating pneumatic transmitter assists in the coordination of key functional areas within facilities. Transmitting data efficiently and accurately, it ensures operating economies and safety. A good product for process control and monitoring.

  • Ashcroft 4480 Non-Indicating Pneumatic Transmitter

    Setpoint Type Deadband Connection Setpoint Ranges
    Adjustable Fixed 1/2 NPT < 150 psi, 150-3000 psi, > 5000 psi, Vacuum

    The Ashcroft® 4480 non-indicating pneumatic transmitter assists in the coordination of key functional areas within facilities. Transmitting data efficiently and accurately, it ensures operating economies and safety. A good product for process control and monitoring.

  • Ashcroft A2 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V, 0.5-4.5 V Ratiometric 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other 0.25%, 0.50%, 1.00% 15-10000 psi, Vacuum or Compound, Custom

    Ashcroft® A2 pressure transducers are ideal for a broad spectrum of pressure sensing requirements found in heavy industrial, test and measurement applications. They offer the instrument specifier a wide choice of construction and performance variables. These transducers are commonly used in test stands, compressor control, hydraulic systems, process automation, and pump and pneumatic systems control.

    Data Sheet
  • Ashcroft A4 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other 0.25%, 0.50%, 1.00% 15-10000 psi, Vacuum or Compound

    Ashcroft® A4 pressure transmitters are idea for a broad spectrum of pressure sensing requirements where intrinisically safe or non-incendive hazardous location ratings are required. They are commonly used for oil field equipment, upstream oil and gas production, natural gas compression and transfer control, and alternative energy products.

    Data Sheet
  • Ashcroft DG25 Digital Pressure Gauge

    ,
    Dial Size Connection Mounting Accuracy
    2.5"(63mm) 1/8 NPT, 1/4 NPT, BSP, SAE, Other Lower 0.25% FS (Grade 3A), 0.5% FS (Grade 2A)

    Ashcroft® DG25 digital pressure gauges are suitable for use with a wide variety of pressure media in demanding industrial applications. They come with nine preprogrammed engineering units of measure to read pressure. Designed with the OEM in mind, they can easily be custom configured to meet unique requirements.

    Data Sheet
  • Ashcroft F Pressure Switch

    ,
    Setpoint Type Deadband Setpoint Ranges Item Type
    Adjustable Fixed < 150 psi, 150-3000 psi, Vacuum

    Ashcroft® series F line of compact, adjustable pressure switches is designed to satisfy most requirements for alarm, shutdown, control and interlock on a wide variety of process and equipment applications. All models feature hermetically sealed switch contacts and are approved for installation in Division I and II hazardous locations. They are reliable in offshore oil rigs, chemical & petrochemical plants, pulp & paper mills, engines, turbines & compressors, pipelines, and water & wastewater treatment plants.

    Data Sheet
  • Ashcroft GC30 Differential Pressure Sensor

    Item Type Switch Type Deadband Circuit
    OEM Electronic Adjustable PNP or NPN

    Ashcroft® series GC30 differential pressure transducers are a combined three-in-one digital pressure gauge, switch and transducer. They feature a highly reliable variable capacitance sensor using the patented Ashcroft® SiGlas™ sensor. This ultra-thin single crystal diaphragm provides inherent sensor repeatability and stability.

    Data Sheet
  • Ashcroft GC35 Pressure Switch

    , ,
    Setpoint Type Deadband Connection Setpoint Ranges
    Adjustable Fixed 1/4 NPT < 150 psi, 150-3000 psi, > 5000 psi

    Ashcroft® GC35 pressure transducers are combined three-in-one digital pressure gauges, switches, and transducers. They are commonly used for hydraulic presses, stamping equipment, lifts, water/wastewater pressure control, pressure monitoring on lubrication systems, and water, refrigerant, or ammonia based cooling systems.

    Data Sheet
  • Gems 1200/1600 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0.5-5.5 V, 0-10 V 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other 0.50% 15-10000 psi, Vacuum or Compound, Custom

    Gems® series 1200 features stability and toughness via its CVD and ASIC design coupled with a thicker diaphragm. The 1600 series extends the packaging options by providing an all welded stainless steel back. They are commonly used for off-highway vehicles, natural gas equipment, semiconductor processing, power plants, refrigeration, robotics and HVAC.

    Data Sheet
  • Kodiak BBV4 Standard Needle Valve

    ,
    Item Type Seat Connection Size Body Material
    Standard Hard Seat 1/8-3/8 Brass/Bronze

    Kodiak’s type BBV4 steel needle valves are suitable for water, oil, or gas service.

    Data Sheet
  • Kodiak DS Diaphragm Seal

    ,
    Item Type Style Connection Wetted Material
    Industrial Capsule, Welded Threaded, Flanged Metallic

    Kodiak's series DS large diaphragm seals are used in applications where medias may corrode or clog pressure instruments by themselves. The diaphragm is welded to the upper housing or available as a replaceable diaphragm gasketed between the upper & lower housing.

    Data Sheet
  • Kodiak DSM45 Diaphragm Seal

    ,
    Item Type Style Connection Wetted Material
    Mini Welded Threaded Metallic

    Kodiak’s series DSM45 mini diaphragm seals are designed for gauges 1.5″ to 6″ in size and are also acceptable for pressure transducer/transmitters or other small displacement instruments. They feature an all welded design, a standard pressure rating of 2500psi with 5000psi available, and a female threaded standard process connection with a male threaded connection available.

    Data Sheet
  • Kodiak KC102 Utility Pressure Gauge

    Dial Size Connection Mounting Case Material
    1.5"(40mm), 2.0"(50mm), 2.5"(63mm), 3.5" 1/8 NPT, 1/4 NPT, BSP, Other Back Steel

    Kodiak's 102 series pressure gauges are an inexpensive utility gauge used for commercial and industrial applications. This series gauge is commonly used on air, water, oil or gas applications that are compatible with brass/bronze and on applications without excessive vibration or pulsations.

    Data Sheet
  • Kodiak KC302 Industrial Pressure Gauge

    Dial Size Connection Mounting Case Material
    1.5"(40mm), 2.0"(50mm), 2.5"(63mm), 4.0"(100mm) 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other Lower, Back Stainless Steel

    Kodiak’s 302 stainless steel liquid filled pressure gauges are designed to meet the demands of heavy duty industrial applications where brass wetted parts will not do. This series gauge offers 316SS wetted parts and is commonly used on hydraulic and pneumatic applications, pumps, chemical feed systems, R/O systems, or any corrosive application where a stainless steel connection is needed.

    Data Sheet
  • Noshok 700 Process Pressure Gauge

    Dial Size Connection Accuracy Ranges
    4.5" 1/4 NPT, 1/2 NPT 0.5% FS (Grade 2A) 10-200 inches H2O, 1-10 psi, 15-1000 psi, 1500-10000 psi, 15000+ psi, Vacuum or Compound

    Noshok® 600/700 Series process gauges are commonly used in injection molding machines, laboratory and test equipment, power generation, oil field and offshore, utilities, and water and waste water applications. They are available dry or liquid filled.

    Data Sheet
  • Weksler Glass EA14 Specialty Pressure Gauge

    Dial Size Mounting Wetted Material Ranges
    4.5" Lower Brass 15-1000 psi, Vacuum or Compound

    The Weksler Glass® EA14 contractor gauges are suitable for air, water, oil, gas or any other medium not corrosive to copper alloys. A siphon is required for steam applications.

    Data Sheet
  • Anfield SWA Pressure Switch

    Setpoint Type Deadband Connection Setpoint Ranges
    Adjustable, Fixed Fixed 1/8 NPT, 1/4 NPT, BSP, SAE < 150 psi

    Anfield® series SWA are very compact pressure switches suitable for OEM applications, water pressure boost pumps, and filter monitoring. They are available with a WRAS approved EPDM diaphragm for potable water use. They also feature a high quality snap action micro switch for years of trouble free operation.

    Data Sheet
  • Ashcroft 1009 4.5″ and 6″ Industrial Pressure Gauge

    Dial Size Connection Mounting Case Material
    4.5", 6.0"(160mm) 1/4 NPT, 1/2 NPT, BSP, SAE Lower, Back, Panel Mount Stainless Steel

    Ashcroft® 1009 stainless steel gauge is ideal where safe and reliable pressure measurement is essential. It can be used in refrigeration, specialized OEM equipment, deionized water, and hydraulics and pneumatics.

    Data Sheet
  • Ashcroft 106-206 In-Line Flanged Diaphragm Seals

    , ,
    Item Type Style Connection Wetted Material
    Flow Through, Industrial Welded 1/4 NPT, 1/2 NPT, Flanged, Other Metallic, Stainless Steel

    The Ashcroft® 106 and 206 in-line flanged diaphragm seals or isolation devices protect pressure measuring instruments. Mounted in-line to the process piping, they are used on applications where continuous flow prevents process clogging or accumulation, while preventing process fluid loss in the event the measuring instrument is removed or fails. An ideal choice for satisfying challenging installation requirements.

    Data Sheet
  • Ashcroft 1127 Differential Pressure Gauge

    Dial Size Mounting Ranges Wetted Material
    4.0"(100mm), 6.0"(160mm) Lower, Back 15-1000 psid Stainless Steel

    Ashcroft® 1127  differential gauges display the difference of two separate inputs on one dial indicator. The 1127 is offered with “0” at the 12 o’clock position on the dial with positive pressure on either side of zero. The 1127 stainless or monel Bourdon tubes. When the process media is corrosive to the gauge wetted parts, a diaphragm seal with capillary is available.

    Data Sheet
  • Ashcroft 200 Diaphragm Seal

    , , ,
    Item Type Style Connection Wetted Material
    Flow Through, Industrial Welded Threaded, Flanged, Saddle Weld Metallic, Plastic

    Ashcroft® series 200 and 201 large diaphragm seals protect pressure measuring instruments. A metal diaphragm is welded to the top housing. Elastomeric diaphragms are bonded to the top housing. Either provides a double positive seal. They are commonly used for elevated process temperatures, corrosive service, isolation of the process for safety, suspended solids in the process, sanitary connections, replacement of process dead leg, and to ease cleaning between batches.

    Data Sheet
  • Ashcroft 310 Diaphragm Seal

    ,
    Item Type Style Connection Wetted Material
    Mini Welded Threaded Metallic

    Ashcroft® series 310 and 315 mini diaphragm seals protect pressure measuring instruments. Used to ensure process compatibility, they are also applied when process media exhibits high temperature, pulsation, and the potential for plugging or freeze-up. They are commonly used in oil & gas, chemical & petrochemical, engineered systems, and heavy vehicles. They are ideal where corrosion protection and limited spacing are essential.

    Data Sheet
  • Ashcroft 702-703 Flanged High Displacement Diaphragm Seals

    ,
    Item Type Style Connection Wetted Material
    Industrial Welded 1/4 NPT, 1/2 NPT, Threaded, Flanged Metallic, Monel, Stainless Steel

    The Ashcroft® 702 and 703 high-displacement diaphragm seals or isolation devices are used with low pressure or differential pressure gauges with low differential pressure and elevated static pressure. Used to ensure material compatibility, they are also applied when process media exhibits high temperature, pulsation or the potential to clog an instrument connection. An ideal product for satisfying low pressure measurement needs.

    Data Sheet
  • Ashcroft 81 Diaphragm Seal

    , , ,
    Item Type Style Connection Wetted Material
    Flow Through, Industrial Capsule Flanged Metallic, Plastic

    Ashcroft® series 81 isolation rings are mounted inline with process piping. Used for process protection of measuring instruments, the ring design eliminates process accumulation, assuring reliable and accurate pressure readings. These are ideal instruments when reliable and continuous pressure measurement is needed.

    Data Sheet
  • Ashcroft 82 Threaded Isolation Ring

    , ,
    Item Type Style Connection Wetted Material
    Flow Through, Industrial Welded 1/4 NPT, 1/2 NPT, Flanged Metallic, Stainless Steel

    The Ashcroft® 82 isolation ring or isolation device is threaded in-line with process piping. Used on threaded piping systems for protection of measuring instruments. The “ring” design eliminates process accumulation, assuring accurate pressure readings.

    Data Sheet
  • Ashcroft A Pressure Switch

    , , ,
    Setpoint Type Deadband Setpoint Ranges Item Type
    Adjustable, Fixed Fixed < 150 psi, 150-3000 psi, > 5000 psi, Vacuum

    Ashcroft® series APA and APS watertight miniature pressure switches are designed for pressure control in harsh applications and for easy integration into custom equipment or systems. They are ideal for pressure alarm, shutdown, or control where size or compatibility are considerations. They are commonly used in offshore oil rigs, chemical and petrochemical plants, water and wastewater pressure control, pulp and paper, autoclaves and sterilizers, heavy vehicle hydraulic braking, and specialized OEM equipment.

    Data Sheet
  • Ashcroft GC31 Pressure Switch

    , ,
    Setpoint Type Deadband Connection Setpoint Ranges
    Adjustable Fixed 1/4 NPT < 150 psi, 150-3000 psi, Vacuum

    Ashcroft® GC31 pressure transducers are combined three-in-one digital pressure gauges, switches, and transducers. They are commonly used for hydraulic presses, stamping equipment, lifts, tire press vulcanization, pressure monitoring, pressure monitoring on lubrication systems, and water, refrigerant, or ammonia based cooling systems.

    Data Sheet
  • Ashcroft P Differential Pressure Switch

    Item Type Switch Type Deadband Circuit
    Hazardous Location Mechanical Adjustable, Fixed DPDT, SPDT

    Ashcroft® series P differential pressure switches use a unique, dual diaphragm-sealed piston design that features very high static operating pressures and small size. They are currently being successfully used in refineries, chemical and petrochemical plants, water and sewage treatment plants, steel mills, and other tough applications.

    Data Sheet
  • Gems 2200/2600 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0.5-5.5 V, 0-10 V, mV/V 1/8 NPT, 1/4 NPT, 1/2 NPT, BSP, SAE, Other 0.25% 15-10000 psi, Vacuum or Compound

    Gems® series 2200 features stability and accuracy in a variety of enclosure options. The 2600 series extends the packaging options by providing an all welded stainless steel back end. They are commonly used for off-highway vehicles, natural gas equipment, semiconductor processing, power plants, refrigeration, robotics, HVAC, and fuel tank pressure sensors.

    Data Sheet
  • Gems 3820 Pressure Switch

    , , ,
    Item Type Setpoint Type Connection Setpoint Ranges
    Adjustable 1/2 NPT < 150 psi, 150-3000 psi, > 5000 psi

    Gems® series 3820 pressure transmitters are compact loop-powered (4-20mA) transmitters, with a low power 1-5 VDC option also available. They are the same as the 3800 series with the addition of an integrated 30V/120mA switch. The switch setpoint is specified at time of order for factory setting, yet may also be adjusted using the Gems Calibration Kit. The 3820’s rugged construction makes cost of ownership low and they carry a three-year warranty. They are suitable for hazardous locations and hostile environments and meet applications where dependable, continuous monitoring is preferred.

    Data Sheet
  • Kodiak BW42 Snubber

    Manufacturer Series Accessory Type
    Kodiak BW42 Snubbers

    Kodiak's filter pressure snubbers are designed to reduce or prevent oscillations and fluctuations from reaching and affecting pressure instruments. Pressure snubbers reduce pressure spikes only but do not eliminate prolonger overpressure. Filter type snubbers use a porous filter media made of sintered metal and should be used on processes that don't contain sludge or particulates.

    Data Sheet
  • Kodiak KC103 Utility Pressure Gauge

    Dial Size Connection Mounting Case Material
    1.5"(40mm), 2.0"(50mm), 2.5"(63mm), 3.5" 1/8 NPT, 1/4 NPT, BSP, Other Back, Panel Mount Stainless Steel, Steel

    Kodiak’s 103 series pressure gauges are an inexpensive utility gauge used for commercial and industrial applications. This series gauge is commonly used on air, water, oil or gas applications that are compatible with brass/bronze and on applications without excessive vibration or pulsations.

    Data Sheet
  • Kodiak KC25 Low Pressure Gauge

    Dial Size Connection Mounting Case Material
    2.5"(63mm) 1/4 NPT Lower, Back, Panel Mount Steel

    Kodiak's 25 Series low pressure gauges are capsule type pressure gauges used for accurate measurement of low pressures. The standard KC25 lower mount gauge comes in a 2½” dial size with a 1/4″ lower NPT connection. A center back mount (KC25CBM), panel mount (KC25Panel), and flange mount (KC25Flange) are also available.

    Data Sheet Buy Now
  • Kodiak KC311 Ammonia Pressure Gauge

    Dial Size Mounting Wetted Material Ranges
    2.5"(63mm), 4.0"(100mm) Lower Stainless Steel 30-2500 psi, Vacuum or Compound

    Kodiak’s KC311 Ammonia series pressure gauges are designed for ammonia refrigeration applications and come
    with an ammonia scale on dial. They have an all stainless steel body and are liquid filled standard.

    Data Sheet
  • Kodiak SSV4 Standard Needle Valve

    ,
    Item Type Seat Connection Size Body Material
    Standard Hard Seat 1/8-3/8 Stainless Steel

    Kodiak’s type SSV4 steel needle valves are strong, durable, and compact in size. They feature pressures up to 6000psi for soft seat and 10,000psi for hard seat. Available options include high temperature, thumb wheel handle, panel mount, bleed screw, tube end connection, and alternate connection sizes.

    Data Sheet
  • Noshok 200 Pressure Transducer

    Output Connection Accuracy Ranges
    0-5 V, 1-5 V, 1-6 V, 0-10 V, 1-11 V 1/8 NPT, 1/4 NPT, BSP, SAE 0.50% 1-10 psi, 15-10000 psi, Vacuum or Compound

    Noshok® series 200 feature voltage output, stainless steel wetted parts, and are CE compliant to suppress RFI, EMI and ESD. They are commonly used for HVAC, hydraulics & pneumatics, injection molding machines, railroad equipment, and stamping and forming presses.

    Data Sheet
  • Noshok 621 / 622 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 0.5-4.5 V, 0-10 V 1/4 NPT, 1/2 NPT, BSP 0.25% 15-10000 psi, 15000+ psi, Vacuum or Compound

    Noshok® series 621 & 622 pressure transmitters are explosion proof. The 621 has a stainless steel threaded connection, while the 622 has a 316 stainless steel flush diaphragm. Also available is the 622H which has a Hastelloy C flush diaphragm. They are commonly used for chemical processing, gas pressure measurement, oil field & offshore, mining, and well head measurement.

    Data Sheet
  • SSI Technologies MG-MD Digital Pressure Gauge

    Dial Size Connection Mounting Accuracy
    3.0" 1/4 NPT Lower 0.25% FS (Grade 3A)

    SSI® MG-MD digital pressure gauges are multi-functional gauges powered by an external 8-30 Vdc power supply. They are well suited for a variety of commercial and industrial applications such as refrigeration, compressors, pumps, hydraulics, pneumatics, and waste water.

    Data Sheet Buy Now
  • Tel-Tru P521 Differential Pressure Transducer

    Item Type Output Connection Accuracy
    Industrial 4/20mA, 0-5 V 1/4 NPT 0.25%

    Tel-Tru® series P521 standard differential pressure transducers are designed for end users and OEM's where ruggedness, high performance, and reliability are required at a competitive price. They are commonly used for hydraulics & pneumatics, laboratory & test, marine & offshore, pumps & compressors, and petrochemical applications.

    Data Sheet
  • Weksler Glass HA14-4 Process Pressure Gauge

    Dial Size Connection Accuracy Ranges
    4.5" 1/4 NPT 0.5% FS (Grade 2A) 15-1000 psi, 1500-10000 psi, Vacuum or Compound

    Weksler Glass® HA14-4 process pressure gauges are commonly used in industrial applications where standard pressure gauges won’t do. Their case material, accuracy and size help make them extremely durable and long lasting in harsh environments.

    Data Sheet
  • Ashcroft 1005-XUL Specialty Pressure Gauge

    Dial Size Mounting Wetted Material Ranges
    3.5" Lower Brass 15-1000 psi

    Ashcroft® Type 1005P XUL gauges are Underwriters Laboratory listed and Factory Mutual approved for fire protection sprinkler service.

    Data Sheet
  • Ashcroft 1132 Differential Pressure Gauge

    Dial Size Mounting Ranges Wetted Material
    2.0"(50mm), 2.5"(63mm), 3.0", 3.5", 4.0"(100mm), 4.5", 6.0"(160mm) Lower, Back, In-Line, Panel Mount 10-200 inches H2O, 1-10 psid, 15-1000 psid Aluminum, Brass, Stainless Steel

    Ashcroft® 1132 differential gauges are use a convoluted diaphragm design with no migration of the process media. They are recommended for lower differential and high static pressures, up to 1500psi. Body materials are available in Aluminum, Brass, and Stainless Steel, with Buna, Viton, or EPDM seals.

    Data Sheet
  • Ashcroft 1379 Process Pressure Gauge

    Dial Size Connection Accuracy Ranges
    4.5", 6.0"(160mm), 8.5" 1/4 NPT, 1/2 NPT 0.5% FS (Grade 2A) 15-1000 psi, 1500-10000 psi, 15000+ psi, Vacuum or Compound

    Ashcroft® 1379 process pressure gauges are an ideal choice for satisfying most applications and installation requirements. Like the 1279, they can be easily field converted from the weatherproof version to either the sealed or liquid-filled version using an optional kit.

    Data Sheet
  • Ashcroft 2074 Digital Pressure Gauge

    ,
    Dial Size Connection Mounting Accuracy
    3.0", 4.5" 1/4 NPT, 1/2 NPT Lower, Panel Mount 0.25% FS (Grade 3A)

    Ashcroft® 2074, 2174, and 2274 digital pressure gauges are multi-functional gauges that can have any combination of local indication and a 4-20mA signal and switching.

    Data Sheet
  • Ashcroft 80 Diaphragm Seal

    , , ,
    Item Type Style Connection Wetted Material
    Flow Through, Industrial Capsule Flanged Metallic, Plastic

    Ashcroft® series 80 isolation rings are mounted inline with process piping. Used for process protection of measuring instruments, the ring design eliminates process accumulation, assuring reliable and accurate pressure readings. These are ideal instruments when reliable and continuous pressure measurement is needed.

    Data Sheet
  • Ashcroft DDS Differential Pressure Switch

    Item Type Switch Type Deadband Circuit
    Hazardous Location Mechanical Fixed DPDT, SPDT

    Ashcroft® series DDS differential pressure switches are designed to sense low differential pressures between high pressure sources. The design is symmetric such that both the high or low pressure sides of the element can withstand the maximum pressure with the opposite side at atmospheric pressure. The rugged cast aluminum housing incorporates a “frictionless” switching mechanism, and can be specified as watertight or explosion proof. The housing is large enough to accommodate up to one full size SPDT or one DPDT electric switch.

    Data Sheet
  • Ashcroft GC51 Pressure Switch

    , ,
    Setpoint Type Deadband Connection Setpoint Ranges
    Adjustable Fixed 1/4 NPT < 150 psi, 150-3000 psi, > 5000 psi, Vacuum

    Ashcroft® GC51 pressure transducers are up to eight times smaller than a conventional process transmitter. They utilize proven polysilicon thin film sensors that make their design suitable for applications where high overpressure and life cycle are necessary. They are commonly used for pump control, hydraulic systems, compressor control, municipal water tank level, and process automation.

    Data Sheet
  • Ashcroft N Pressure Switch

    ,
    Setpoint Type Deadband Setpoint Ranges Item Type
    Adjustable Fixed < 150 psi, 150-3000 psi, > 5000 psi

    Ashcroft® series NPA explosion proof pressure switch is designed to satisfy challenging applications needing high cycle rates with switch functionality. This design incorporates proven thin film technology to trigger a high quality relay, making this an extremely reliable and long lasting switch. This switch is ideal for use with pressure control, shutdown or alarm operations.

    Data Sheet
  • Ashcroft T2 Pressure Transducer

    Output Connection Accuracy Ranges
    4/20mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V, 0.5-4.5 V Ratiometric 1/8 NPT, 1/4 NPT, BSP, SAE, Other 1.00% 15-10000 psi, Vacuum or Compound

    Ashcroft® T2 pressure transducers are affordable digitally compensated instruments for general industrial applications. They are commonly used for process automation, compressor control, hydraulic systems, engine monitoring, pump control, pneumatics, refrigeration equipment, presses, and machine tools.

    Data Sheet
  • Gems PS61 Pressure Switch

    ,
    Item Type Setpoint Type Connection Setpoint Ranges
    Adjustable, Fixed 1/8 NPT, 1/4 NPT, BSP, SAE < 150 psi, 150-3000 psi

    Gems® series PS61 are compact pressure switches designed for OEM applications. They are equipped with high proof pressure capabilities for demanding hydraulic applications such as forklifts, scissor lifts, and off road equipment.

    Data Sheet
  • Kodiak DSMFLUSH Diaphragm Seal

    , ,
    Item Type Style Connection Wetted Material
    Flush, Mini Welded Threaded Metallic

    Kodiak’s series DSMFLUSH mini flush diaphragm seals are particularly suitable for corrosive, heavily loaded or viscous fluids which might damage or clog the process connection of the measuring instrument. They may be used where space is limited or for quick assembly.

    Data Sheet
  • Kodiak KC Siphons

    Manufacturer Series Accessory Type Connection Size
    Kodiak KC Siphons Siphon 1/4, 1/2-3/4

    Kodiak’s siphons are used on steam applications to protect the pressure measuring instrument from high temperatures that would otherwise damage the instrument if it was mounted directly to the process. Kodiak’s siphons come in numerous designs, sizes, and schedules to fit almost any steam application.

    Data Sheet
  • Kodiak KC104 Utility Pressure Gauge

    Dial Size Connection Mounting Case Material
    1.5"(40mm), 2.0"(50mm), 2.5"(63mm), 3.5" 1/8 NPT, 1/4 NPT, BSP, Other Back, Panel Mount Stainless Steel, Steel

    Kodiak's 104 series pressure gauges are an inexpensive utility gauge used for commercial and industrial applications. This series gauge is commonly used on air, water, oil or gas applications that are compatible with brass/bronze and on applications without excessive vibration or pulsations.

    Data Sheet
  • Kodiak SW42 Snubber

    Manufacturer Series Accessory Type
    Kodiak SW42 Snubbers

    Kodiak's filter pressure snubbers are designed to reduce or prevent oscillations and fluctuations from reaching and affecting pressure instruments. Pressure snubbers reduce pressure spikes only but do not eliminate prolonger overpressure. Filter type snubbers use a porous filter media made of sintered metal and should be used on processes that don't contain sludge or particulates.

    Data Sheet
  • Noshok 200 Low Pressure Gauge

    Dial Size Connection Mounting Case Material
    2.5"(63mm), 4.0"(100mm) 1/4 NPT, 1/2 NPT Lower, Back, Panel Mount Steel

    Noshok® 200 series low pressure gauges are sensitive capsule-type, non-fillable dry gauges. They are commonly used for filter monitoring, gas distribution, HVAC, leak detection, level indication, and medical applications.

    Data Sheet

     

  • Noshok 25/25H Diaphragm Seal

    ,
    Item Type Style Connection Wetted Material
    Mini Welded Threaded Metallic

    Noshok® series 25 and 25H mini diaphragm seals are designed to isolate the pressure measuring instrument from corrosive or viscous process media. They utilize an all welded, all metallic housing to eliminate potential leak paths. They are commonly used for water & wasterwater, oil & gas, petrochemical, industrial automation, marine, agriculture, mud pumping, pulp & paper, pneumatic, and steel fabrication.

    Data Sheet
  • Noshok 30 Diaphragm Seal

    , ,
    Item Type Style Connection Wetted Material
    Industrial Welded Threaded, Flanged Metallic, Plastic

    Noshok® series 30 and 30H large diaphragm seals utilize an all metallic diaphragm welded to the upper housing to allow field replacement of the lower housing while maintaining continuity of the measuring system. They are commonly used for water & wastewater, oil & gas, petrochemical, chemical processing, industrial automation, marine, agriculture, steel fabrication, mud pumping, pulp & paper, and pneumatic applications.