PMA KS 50-1 PID Temperature Controller
The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.
The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.
The controller is suitable for a number of industry applications including:
Furnaces and ovens
Burners and boilers
Plastics processing
Hot runners
Driers
Climatic chambers
Heat treatment plants
| Manufacturer | West Control Solutions |
|---|---|
| Series | KS 50-1 |
| Din Size | 1/16 |
| Segments | 10-24 |
| Programs | 1-9 |
| Outputs | 1-9 |
| Text/Graphic Display | No |
| Dimensions and Size | 96m x 48mm x 118mm (HxWxD), 1/8 DIN |
| Connectors | Pin or screw terminals |
| Primary Input Type | Universal (TC, RTD, DC linear mA/mV) |
| Other Inputs | External setpoint, Heating current monitoring |
| Output Type | Relay, Logic, Continuous, Optocoupler |
| Max. Number of Outputs: | 3 |
| Scan Time: | 100 ms |
| Control Type: | 2-point (on/off), continuous PID control, or 3-point stepping |
| Number of Programmer Segments: | 10 |
| Power Supply: | 90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz, 18-31 V DC |
| Communications: | Modbus RS422/485 |
| Panel Sealing: | IP65 |
| Certifications: | CE, cULus, DIN EN 14597, GOST-R |
| Software Tools: | BlueControl |
Related products
-
Single Loop
PMA KS 92-1 Temperature & Humidity Controller
-
Single Loop
CAL 9400 Dual Display Temperature Controller
