A discrete 1/16 DIN controller, designed specifically for plastic extrusion processes. Users benefit from a simple menu structure with pre-populated setup fields with default parameters for plastic applications.
Control options include Heat, Heat/Cool as well as offering setpoint ramping to help protect against heater burn out.
The versatile PlastX controller can also be used as a standalone process indicator to measure melt temperature.
Button Text| Manufacturer | |
|---|---|
| Series | |
| Din Size | |
| Dimensions and Size | W48m x H48mm x D110mm, 1/16 DIN |
| Primary Input Type | Universal (TC, RTD, DC Linear mA/mV) |
| Output Type | Relay, SSD, Triac |
| Max. Number of Outputs: | 3 |
| Control Type: | PID,ON/OFF, Manual, Alarm, Ramp to setpoint |
| Power Supply: | 100-240V AC 50-60Hz |
| Communications: | RS485 serial (Modbus) |
| Certifications: | CE, UL, ULC, CSA |
Only logged in customers who have purchased this product may leave a review.
The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 92-1 is particularly suited to the following applications:
Furnaces and ovens
Burners and boilers
Plastics processing
Driers
| Manufacturer | Series | Din Size |
|---|---|---|
| West Control Solutions | KS 92-1 | 1/4 |
The KS 90-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 90-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 90-1 is particularly suited to the following applications:
Furnaces and ovens
Burners and boilers
Plastics processing
Driers
| Manufacturer | Series | Din Size |
|---|---|---|
| West Control Solutions | KS 90-1 | 1/8 |
The universal temperature controller KS 41-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.
The KS 41-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.
This controller is particularly well suited to the following industry applications:
Furnaces and ovens
Burners and boilers
Plastics processing
Driers
| Manufacturer | Series | Din Size |
|---|---|---|
| West Control Solutions | KS 41-1 | 1/8 |
The 6170+ single loop controller is part of the Plus series range and has 3-point stepping control designed specifically for open loop, valve motor drive (VMD) applications.
The 6170+ incorporates advanced tuning algorithms, with selectable pre-tune and self-tuning for easier setup. The self-tune also reduces output activity to an absolute minimum without compromising control quality, thereby reducing wear and tear on mechanical components such as valves, contactors and relays. In test, these controls have cut down valve oscillation from 30 to 40 times a minute to just a few. Pre-tune plus self-tuning has also been shown to get on control up to 3 times faster.
In addition to the VMD outputs, further output options exist which can be designated as outputs for alarms, 24 VDC transmitter power supply, retransmit process value or setpoint.
Button Text| Manufacturer | Series | Din Size |
|---|---|---|
| West Control Solutions | 6170+ | 1/16 |
Reviews
There are no reviews yet.