Plast-O-Matic

Showing 37–48 of 68 results

  • Plast-O-Matic MBVL Locking Ball Valve

    Plast-o-matic® type MBVL lockout/tagout ball valves are designed to accept most OSHA approved locks and shackles. They are available as a complete valve assembly or as a kit for field retrofit. The parts are fabricated from corrosion resistant thermoplastic.

    Get a Quote Data Sheet

    Button Text
  • Plast-O-Matic MBVM Metering Ball Valve

    Plast-o-matic® type MBVM metering manual ball valves are designed for use with True Blue ball valves with or without ZC angle characterized balls and come in ½” to 2″ sizes. They are available as a complete valve assembly kit or as a kit for field retrofit. Metering parts are made from corrosion resistant thermoplastic.

    Get a Quote Data Sheet

    Button Text
  • Plast-O-Matic MFR Manual Self-Closing Plastic Valve

    Plast-o-matic® type MFR manual self-closing valves are the answer for handling pure deionized rinse water where your hand or hands must be free to handle the part being rinsed. They are also ideal for handling corrosive or other ultra pure liquids where economical performance is a prime consideration. They are compact, easy to install, and allow for smooth, easy operation by palm or foot.

    Get a Quote Data Sheet

    Button Text
  • Plast-O-Matic MPC Check Valve

    Plast-o-matic® type MPC valves are miniature plastic check valves that are designed for exceptionally high quantities of tubing check valves at an exceptionally low cost. They feature superior sensitivity, very rapid response, low cost, and application flexibility. They also utilize a flexible elastomer diaphragm and can be installed in any position.

    Get a Quote Data Sheet

  • Plast-O-Matic PCWR Miscellaneous Plastic Valve

    Plast-o-matic® type PCWR process cooling water sticks for return side can be designed and built to any configuration/orientation and offer the choice of a diaphragm or ball valve and true unions or custom end connectors. They incorporate a quarter turn True Blue trunnion ball valve, pressure and temperature gauge, and in-line flow meter with visual indicators in a small footprint stick. Gauge face and flow meter are aligned for quick reading. Stick is reinforced to minimize possibility of damage. A variety of end connectors and custom valve combinations can be specified.

    Get a Quote Data Sheet

    Button Text
  • Plast-O-Matic PCWS Miscellaneous Plastic Valve

    Plast-o-matic® type PCWS process cooling water sticks for supply side can be designed and built to any configuration/orientation with valves, gauges, regulators and other components customizable for any application. They incorporate a quarter turn True Blue trunnion ball valve, pressure and temperature gauge, and premium pressure regulator in a compact, rugged design. Gauge can be specified on either side of the regulator so that it faces out for easy reading. Stick is reinforced to minimize possibility of damage. A variety of end connectors and custom valve combinations can be specified.

    Get a Quote Data Sheet

    Button Text
  • Plast-O-Matic PDS Pulsation Dampener/Suppressor

    Plast-o-matic® PDS Pulsation Dampeners and Surge Suppressors will steady a pulsing flow caused by diaphragm pumps, piston pumps, peristaltic pumps and other quick flow interrupting equipment. When used properly, quick pulsating flows will be greatly reduced preventing a number of flow control problems. Pulsation dampening provides the added benefit of smoothing the output supplied by many types of pumps, especially double diaphragm pumps. The PDS will steady a vibrating pointer of a pressure gauge or flow meter under flowing conditions. This provides a steady, uninterrupted supply to points of use, which will greatly enhance system productivity, prolong pump life, and prevent splashing and foaming.

    Get a Quote Data Sheet

    Button Text
  • Plast-O-Matic PPMBV Ball Valve

    Plast-o-matic® type PPMBV polypropylene ball valves are made from natural, unpigmented, virgin polypropylene designed specifically for ultra pure water and contain no plasticizers or fillers. In addition, the valves are assembled dry, eliminating contamination via any lubricants.

    Get a Quote Data Sheet

    Button Text
  • Plast-O-Matic PR Pressure Regulator

    Plast-o-matic® type PR high performance pressure regulators automatically regulate and prevent the downstream pressure from exceeding its set point. They offer a wide range of adjustable settings, rugged construction, and a rolling diaphragm design that assures sensitive operation.Get a Quote Data Sheet

  • Plast-O-Matic PRA/PRAM Pressure Regulator

    Plast-o-matic® type PRA & PRAM spring-free air-loaded pressure regulators eliminate spring corrosion problems and outperform spring-loaded regulators through improved response to pressure changes; pressure is maintained without sacrificing flow. They are ideal for applications requiring frequent adjustment or remote control.Get a Quote Data Sheet

  • Plast-O-Matic PRD Pressure Regulator

    Plast-o-matic® type PRD pressure differential regulators have a pressure differential to 50psi and are used for corrosive and high purity liquids. Their reinforced rolling diaphragm assures sensitive control. A typical application improves optimum filter efficiencies and safety by limiting the pressure differential across a filter or a combination of filters as used in the manufacture of ultra high purity water for the semiconductor industries.

    Get a Quote Data Sheet

    Button Text
  • Plast-O-Matic PRH Pressure Regulator

    Plast-o-matic® type PRH high performance pressure regulators provide higher set pressures and flow capacities with each model. These are achieved with less pressure losses than similar size competitive regulators. The 4″ size is custom built to order.

    Get a Quote Data Sheet

    Button Text