The Sewur Valve is designed to provide easy access into residential and municipal sewer lines for emergency cleanouts as well as greatly reduce the risk of sewage backflow into the residence.
Place this valve in-line with your sewer drain line, and place an access pipe to the top port of the valve. The access pipe will allow easy access to the valve’s shut-off and clean-out features.
Benefits of the Sewur Valve:
Great reduction of the possibility of raw sewage back up with the plunger installed
Easy access for sewer line cleaning
Disconnection fo the sewer line in low lying areas prone to flooding
Municipality or water service provider can disconnect prior to repair or cleanout
Compatible with SDR and Schedule 40 Piping Systems
Plunger and Housing meet the same specifications and are interchangeable with other popular brands of this design
|Dial Size||Mounting||Wetted Material||Ranges|
Kodiak’s 10135 sprinkler gauges are designed for use in the fire protection/sprinkler market. They are suitable for air, water, oil, gas or any other medium not corrosive to brass. Other ranges, connection locations, mounting styles and accessories available.
|1.5"(40mm)||1/8 NPT, 1/4 NPT||Back||1.0% FS (Grade 1A)|
Kodiak’s Series KCDG15 digital pressure gauges offer high performance with 1.0% full scale accuracy in a compact size allowing for versatility in multiple applications. The KCDG15 is commonly used on pneumatic regulators, filters, compressors, or any application where brass is acceptable for air or other gases.
|Dial Size||Connection||Mounting||Case Material|
|2.5"(63mm)||1/4 NPT||Lower||Stainless Steel|
Kodiak’s 301 stainless steel liquid filled pressure gauges are designed to meet the demands of heavy duty industrial applications where brass wetted parts will not do. This series gauge offers 316SS wetted parts and is commonly used on hydraulic and pneumatic applications, pumps, chemical feed systems, R/O systems, or any corrosive application where a stainless steel connection is needed.
|Kodiak||4" & 6" Sewur Plug|
The Sewur™ Universal Sewur Plug is designed to work in most standard 4″ or 6″ cleanout tees with a riser pipe. Its heavy-duty flexible bladder, which is attached to a solid upper body with SS lifting ring, is filled with water on site. The Sewur™ Plug is lowered through the riser pipe until the sealing member rests on the bottom and conforms to the interior surface of the tee. Slight variations in the degree of sealing will occur depending on the shape of the interior cavity of the tee but 90% closure can be expected and 100% closure with the inclusion of solids in the line. Ideally, the plug should be located in lines where solids are present. Standard 4″ or 6″ Cleanout T’s can be used.
A heavy hook with a 3/4″ FNPT fitting is included with each Sewur™ Plug . Simply attach a length of 3/4″ pipe (customer supplied) to the hook assembly to use to lower the Sewur™ Plug into the cleanout. For ease of removal it is suggested to put a standard PVC 3/4″ tee fitting on the opposite end to create a handle to lower and raise the plug. The hook can be removed after the plug is installed. If left in place attached to the plug’s lifting ring, access can be blocked using a padlock ready plug on top of the riser pipe. Padlock ready plugs designed for use on the end of riser pipes with interior diameter ranges of 3.65″ to 4.38″ and 5.77″ to 6.08.”
© 2017 Kodiak Controls - All Rights Reserved.