4/20mA, 0-5 V, mV/V
Tel-Tru® series P331 sanitary tank level transmitters are 3A compliant and designed for CIP/SIP systems. A key feature of the sensing element is its advanced temperature compensation methods, which not only improve performance over a wide temperature band, but also greatly reduce CIP/SIP recovery times. These transmitters are commonly used for biotech, cosmetics, dairy, food & beverage processing, and pharmaceutical applications.
Tel-Tru® Type ND5 Digi-Tel industrial direct thermometers offer a high visibility read-out, maximum accuracy, rugged convenience, and industry-leading value for your investment. They are a direct replacement for Mercury-in-Glass thermometers and meet the requirements for general industrial, retort, and dairy applications.
Tel-Tru® Type ND4 Digi-Tel industrial remote thermometers are protected from volatile materials, high vibration, or other environmental conditions when mounted remotely from the sensor. They are a direct replacement for Mercury-in-Glass thermometers and meet the requirements for general industrial, retort, and dairy applications.
The Tel-Tru® CS, CM, & CL series clip-on pipe thermometers are designed for clipping on to pipes or tubes ¾” to 23⁄8” in diameter. Three different clip sizes include: small, medium, and large.
The Tel-Tru® DM & TB series surface thermometers are 2″ dial compact thermometers that sense surface temperature. Exposed bimetal coil sensors provide a quick and accurate surface temperature reading. Series DM are dual magnet thermometers designed for horizontal or ferrous non-horizontal surfaces. They feature two Alnico magnets that act as a base and hold the thermometer in place. Series TB tab thermometers are designed with two tabs with pre-drilled holes for screws. Two mounting configurations are available — surface or flush.
© 2017 Kodiak Controls - All Rights Reserved.