Shop

Showing 1–12 of 20 results

  • MG1 Digital Pressure Gauge

    SSI® MG1-9V digital pressure gauges are stand alone 9V battery operated multi-functional gauges. They have a standard input pressure port made of 316L stainless steel which has better pitting corrosion resistance in some media, such as seawater. This makes them well suited for marine applications.

    Data Sheet

    test

    Manufacturer Dial Size
    SSI Technologies 2.5"(63mm)
    $140.00$225.00
  • MG-9V Digital Pressure Gauge

    SSI® MG-9V digital pressure gauges are stand alone 9V battery operated multi-functional gauges. They are well suited for a variety of commercial and industrial applications such as refrigeration, compressors, pumps, hydraulics, pneumatics, and waste water. Buying options below include various ranges, NIST certification, and/or a protective rubber boot for your digital gauge.

    Data Sheet

    test

    Manufacturer Dial Size
    SSI Technologies 3.0"
    $160.00$263.00
  • KCDG15 Digital Pressure Gauge (Gas Only)

    Kodiak’s Series KCDG15 digital pressure gauges offer high performance with 1.0% full scale accuracy in a compact size allowing for versatility in multiple applications. The KCDG15 is commonly used on pneumatic regulators, filters, compressors, or any application where brass is acceptable for air or other gases.

    Data Sheet

    test

    Manufacturer Dial Size
    Kodiak 1.5"(40mm)
    $40.00$125.00
  • MGA Digital Pressure Gauge (Gas Only)

    SSI® MGA-9V digital pressure gauges are stand alone 9V battery operated multi-functional gauges. They are lower cost with an accuracy of ±1.0% full scale for dry air and non-corrosive gas applications only.

    Data Sheet

    test

    Manufacturer Dial Size
    SSI Technologies 2.5"(63mm)
    $110.00$195.00
  • DFT-110 Drum Level Sensor

    SSI® type DFT-110 ultrasonic level sensors are cost competitive non-contact liquid level drum gauges. The DFT-110 was designed for usage on ANSI MH2-2004 vertical drums with ≤32″ depths. The gauge allows the user to easily select between the following vertical drum settings: 15, 30, or 55 gallon and 57, 114, or 208 liter. It is not intended for use with gasoline.

    Data Sheet

    test

    Manufacturer Series
    SSI Technologies DFT-110
    $165.00
  • DFT-220 Drum Level Sensor – 4/20mA

    SSI® type DFT-220 ultrasonic level sensors are cost competitive non-contact liquid level drum gauges with 4-20 mA output. The DFT-220 was designed for usage on standard ANSI MH2-2004 vertical drums with ≤32″ depths. The gauge allows the user to easily select between the following vertical drum settings: 15, 30, or 55 gallon and 57, 114, or 208 liter. It is not intended for use with gasoline.

    Data Sheet

    test

    Manufacturer Series
    SSI Technologies DFT-220
    $205.00
  • Harwil CF-112 Chemical Feed Controller

    Harwil® type CF-112 chemical feed pump controllers are stand alone interface modules that automatically actuate a chemical feed pump when primary bulk fluid begins to flow. These modules can be used in isolated stand alone systems or as part of large complex systems. Typical uses are for metering and/or adding chemicals in both continuous and batch fluid systems such as: well water, drinking water, waste fluid processing, cooling tower pH/orp control, metal plating make up solutions, and boiler treatment additives.

    Data Sheet

    test

    $173.88
  • Harwil CF-12/1G Chemical Feed Controller

    Harwil® type CF-12/1G one gang chemical feed pump controllers are stand alone interface modules that automatically actuate a chemical feed pump when primary bulk fluid begins to flow. These modules can be used in isolated stand alone systems or as part of large complex systems. Typical uses are for metering and/or adding chemicals in both continuous and batch fluid systems such as: well water, drinking water, waste fluid processing, cooling tower pH/orp control, metal plating make up solutions, and boiler treatment additives.

    Data Sheet

    test

    $169.57
  • Harwil CF-12/2G Chemical Feed Pump Controller

    Harwil® type CF-12/2G two gang chemical feed pump controllers are stand alone interface modules that automatically actuate a chemical feed pump when primary bulk fluid begins to flow. These modules can be used in isolated stand alone systems or as part of large complex systems. Typical uses are for metering and/or adding chemicals in both continuous and batch fluid systems such as: well water, drinking water, waste fluid processing, cooling tower pH/orp control, metal plating make up solutions, and boiler treatment additives.

    Get a Quote Data Sheet

    [button href=”https://kodiakcontrols.com/wp-content/uploads/2016/10/harwil_cf12_control.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]

  • Harwil CF-8/1G Chemical Feed Pump Controller

    Harwil® type CF-8/1G one gang chemical feed pump controllers are stand alone interface modules that automatically actuate a chemical feed pump when primary bulk fluid begins to flow. These modules can be used in isolated stand alone systems or as part of large complex systems. Typical uses are for monitoring fluid flow in air conditioning systems, cooling in data centers, chillers, fluid blending systems, natural gas, industrial refrigeration systems, pools & spas, scrubbers, and water treatment systems.

    Get a Quote Data Sheet

    [button href=”/wp-content/uploads/2016/10/harwil_cf8_control.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]

  • Harwil CF-8/2G Chemical Feed Pump Controller

    Harwil® type CF-8/2G two gang chemical feed pump controllers are stand alone interface modules that automatically actuate a chemical feed pump when primary bulk fluid begins to flow. These modules can be used in isolated stand alone systems or as part of large complex systems. Typical uses are for monitoring fluid flow in air conditioning systems, cooling in data centers, chillers, fluid blending systems, natural gas, industrial refrigeration systems, pools & spas, scrubbers, and water treatment systems.

    Get a Quote Data Sheet

    [button href=”https://kodiakcontrols.com/wp-content/uploads/2016/10/harwil_cf8_control.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]

  • Harwil L-21N Level Switch

    Harwil® type L-21N industrial level switches are low cost, high performance switches made from highly durable plastics. Commonly used on restoration tanks for carpet cleaners, they feature a variable liquid differential and a single point pump up/pump down level control. Interchangeable differential band modules, for all non L-21+ versions, allow for 5 minute on-site switching of differentials.  The unit below has a 5″ differential and fits most Hydramaster and BLUEline models.  Other differential lengths and configurations available.  Please call or request a quote.

    Data Sheet

    test

    Manufacturer Series
    Harwil L-21N/15A/5/AA/3FT(16-3)/.030F
    $162.80