Additional information
| Manufacturer | |
|---|---|
| Series | |
| Actuation Type | Electric Actuated |
| Configuration Type | 2-Way |
| Connection Size | 1/8-3/8, 1/2-3/4, 1-2 |
Wholesale distributor of pressure, temperature, flow, and level instrumentation since 1989.
Plast-O-Matic EBVC Ball Valve
Plast-o-matic® type EBVC & TEBVC features a rugged weatherproof and anti-corrosive polyamide housing. A visual indicator shows the position clearly. Selectable manual override and two volt free end of travel confirmation switches are also included as standard features.
Downloads
No downloads available.Related products
-
Plast-O-Matic MBV Ball Valve
Plast-o-matic® type MBV valves provide more safety and design features than any other thermoplastic valve. With its mirror-polished ball, perfectly machined sealing surfaces, Trunnion centering design, PTFE thrust bearing and O-ring loaded floating PTFE seats, the True Blue manual ball valve offers smooth turning even in difficult applications. The floating seats automatically compensate for seat wear, and after long term cycling, the carriers can easily be returned to their original position simply by tightening the union nuts. The 2 way valve comes in sizes ranging from ½” up to 4″, and the 3 way version comes in sizes from 2″ to 4″.
Button Text Button Text -
Plast-O-Matic EASYMT/EASMT Solenoid Valve
Plast-o-matic® type EASYMT & EASMT valves are direct acting, normally closed PTFE bellows seal solenoid valves used for pressure, drain, and vacuum service. They are designed for all types of aggressive chemicals, salt solutions, acids, caustics, and ultra pure liquids such as deionized water. They include a W24 fully rectified coil with Z-Cool DIN. A rectified R24 coil is optional.
Button TextItem Type Configuration Type Solenoid Operation Connection Size Industrial 2-Way Direct Operated 1/8-3/8, 1/2-3/4, 1-2 -
Plast-O-Matic TRVDT Relief Valve
Plast-o-matic® type TRVDT three way bypass valves offer high flow relief with 3 port design and are ideal for applications where minimal footprint is required or where use of a piping tee is impractical. The valve has a straight-through flow pattern when closed. When set point is exceeded, the diaphragm is lifted off the center port, and excess flows down and out through the third port at the bottom of the valve.
Button Text -
Plast-O-Matic PPMBV Ball Valve
Plast-o-matic® type PPMBV polypropylene ball valves are made from natural, unpigmented, virgin polypropylene designed specifically for ultra pure water and contain no plasticizers or fillers. In addition, the valves are assembled dry, eliminating contamination via any lubricants.
Button Text