Additional information
| Manufacturer | |
|---|---|
| Series |
Wholesale distributor of pressure, temperature, flow, and level instrumentation since 1989.
Plast-O-Matic FC Flow Control Valves
Plast-o-matic® type FC flow control valves are designed for liquids similar in viscosity to water. They are used to maintain a constant predetermined flow in system and utilize a diaphragm that changes shape with inlet pressure changes, thus maintaining the constant flow rate. They can be used for corrosive and ultra pure liquid applications.
Related products
-
Plast-O-Matic ABV Ball Valve
Plast-o-matic® type ABV air actuated ball valves feature all plastic construction ideal for corrosive atmospheres. Direct manual override is standard on both the ABVA and ABVS models. The ABVA uses air pressure to open and to close, while the ABVS has a spring kit that easily converts the ABVA to “fail-safe” operation. The ABVA requires a 4 way air solenoid valve, and the ABVS requires a 3 way air solenoid valve to control actuation.
[button href=”/wp-content/uploads/2016/10/plastomatic_abv_valve.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
-
Plast-O-Matic EASY Solenoid Valve
Plast-o-matic® type EASY valves are direct acting, normally open, two way solenoid valves that have a quad seal design for pressure, drain, and vacuum service. They are used for applications requiring a valve to remain open when de-energized, or when it would be dangerous for a valve to close during an emergency or power failure. These valves can be used with corrosive or ultra pure liquids and do not require line pressure to aid in closing and opening.
[button href=”https://kodiakcontrols.com/wp-content/uploads/2018/01/plastomatic_easy_valve.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Item Type Configuration Type Solenoid Operation Connection Size Industrial, OEM/Mini 2-Way Direct Operated 1/8-3/8, 1/2-3/4 -
Plast-O-Matic RVD Relief Valve
Plast-o-matic® type RVD valves are angle pattern, compact, economical, and ideal for low through high pressure applications. They feature a single flat diaphragm which is an advantage where salt crystallization problems can cause valve sticking. Relief setting is infinitely adjustable from 5 to 150psi.
[button href=”/wp-content/uploads/2016/10/plastomatic_rvd_valve.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
-
Plast-O-Matic PS Solenoid Valve
Plast-o-matic® type PS valves are pilot operated, normally closed PTFE bellows seal solenoid valves. They automatically shut off flow of highly corrosive and ultra pure liquids. They can handle acids, caustics, solvents, chlorine solutions, sodium solutions, deionized water, reverse osmosis water, brewery processes, etc. as long as a 5 psi differential is maintained. Series PS is not suitable for solutions containing particulate matter or solutions that tend to precipitate solids.
[button href=”/wp-content/uploads/2016/10/plastomatic_ps_valve.pdf” target=”_blank” icon=”no-icon” class=”btn-ghost”]Data Sheet[/button]
Item Type Configuration Type Solenoid Operation Connection Size Industrial, OEM/Mini 2-Way Direct Operated 1/2-3/4, 1-2, 3+